zroadster.net

dazed

Hi I purchased these from eBay, but part ex'ed the car before fitting them so they are as new. So, since i dont have the car anymore and I have more need for the space than the sensors here they are. They are part No. 34521163027 according to RealOEM they fit the following (but please check yourself...

dazed

Now actually sold.

Thanks Iain, it was good to meet you.

dazed

Provisionally sold.

dazed

Now the Zed has gone I have the above for sale. The wind deflector for models with roll hoops its in excellent condition and comes with the extended tonneau mounts. I bought it a year ago from someone on here and would just like to recover my costs, so £50 + delivery, I paid £5 to get it from a UK a...

dazed

Theres definately an exhaust cam sensor i can see it, and it shows on realoem.
I have a 2.2

dazed

estocks - thank you for your help. But i could not get it running so took the the car to local indie today and his diag tool confirmed what carsoft had being saying all along... Not a faulty wheel sensor but a faulty ABS pump. :( Oh he also found that the exhaust cam sensor is not registering. Odd a...

dazed

Yes i did copy the ini file and the environment variable was already there with the correct value.
I will try to start it manually later and report back but i think you might be on to something here.

dazed

Ah. No.
I do notice that when i run up INPA i get nothing but the API error. Then if I run Tool32 and then INPA i get labels on the buttons at the bottom of the screen and then the API error.
Might be a red herring but its leading to me to think I'm doing something wrong.
Thanks for your help.

dazed

Im going to look very dim here but... I didnt see any service start anywhere and theres no such service in my list of installed services. Where should i be looking?

Its not that Tool32.exe process thats eating up my processor is it?

dazed

Ok so i have installed INPA and followed the above almost exactly. My laptop has a serial port so i havent changed values to USB. Carsoft is working fine, i have a lead from the 20 pin connector to a box and then a serial lead from that to my serial port on the laptop. The issue i have is an error o...

dazed

Thanks for the responses. I'm not going to get a chance to work on the front sensors for a couple of weeks, so in the meantime i am sourcing INPA, i hadnt heard of it before :oops: i can easily find the time to plug the laptop in and hopefully i can get some more meaningful error codes. I'll let you...

dazed

I dont post much, but I'm here everyday reading. I seem to just post when i have a problem that i havent seen before. So heres my latest problem... I have the random ABS / ASC lights problem very occasionally whilst driving the lights come on. They can be cleared by switching off, waiting a minute t...

dazed

Thanks Zed Carer, that helped, i managed to get the little symbol panel back in and located the rattle - a previous owner has taped the bulb holder to the under side of the switch and the tape has given way! But i couldnt get the switch out fully out as I ran out of time. Titan... I was wondering ho...

dazed

Earlier this week the Z developed an annoying rattle, i have located to the headlamp switch area and have just removed the bottom part of the dash and had a feel around I'm now convinced its the bulb holder that lights the headlamp / side light symbols but i cant get the switch and vent piece out to...

dazed

Mid-day today. Parked next to each other, one a 2.2 the other 1.9 both facelift and tidy.

Anyone here?

Sadly i wasnt in my Zed so I didnt park next to them. Why when i have to go out in the 4x4 does it turn sunny so I wish I was in my Z?

dazed

I like it.

Lots

Look out for seagulls!

dazed

My gas strut was faulty and the top part had come disconnected from the bottom part so removal was easy and safe. Replacing it was straightforward, i clipped the bottom part on first, behind the trim behind passenger seat, this leaves the top part standing proud and could then be clipped to the ball...

dazed

Geoff H wrote: It was probably brought by somebody who liked it and will enjoy driving it

I would hope so, seems like a lot of money to spend otherwise!

dazed

Well someone bought it!

C'mon own up, who was it?

dazed

Surely there can't be two people with such little taste??? :? :? Oh yes there can - most of them are called Barry (sorry, BAZ2780, I don't mean you :oops:)! Found it here, where it was mercilessly torn to shreds: :lol: http://www.barryboys.co.uk/phpBB2/viewtopic.php?t=27915 Cheers R. My God!!!!! I ...

dazed

///m murf wrote:
dazed wrote:Hi, What car's it for?
Any Z3

Thanks for clearing that up, what with the recent conversations regarding which struts will fit 6 cylinder Z3's and your signiture i wasnt sure.

PM sent

dazed

Hi, What car's it for?

dazed

Thanks for the suggestions guys, its a toss up between Barking and Chelmsford, Barkings a little closer but theres not much to do once I'm there so i may well use Chelmsford.
Thanks again.

dazed

Hi
Seeing as there are a number of owners in this area, does anyone have any recomendations?
Right now i need some bits checking out, not convinced its running right so i figure a fault read is a good place to start. But then i will need to know someone nearby for any future work.
thanks

dazed

PM sent

dazed

Well its worth a shot...
Go on you know you have a spare one that you dont need and really want to sell to me!

Prices seem to be a bit over the place on ebay and i dont want to wait for an auction to end.

dazed

Spooky. I have 2.2. I got to work this morning and as i switched off the low oil level light lit up, i checked it before leaving work and it was above MIN so i drove home and just logged onto the forum to look for recomendations and saw this post! I've done about 1000 miles in a month and used from ...

dazed

Hmm i havent looked behind that trim, i dont have a switch for an electric roof although i guess it might have been removed if the roof packed up. I can see that it is a damper of sorts, the piece at the top is wider than at the bottom so it does slide over it, and it looks like there are some inter...

dazed

OK, no rush for me to fix it then.

its definately the strut thats broken the bottom and top ball joints are attached its the strut that's come apart.
Thanks again

dazed

Hi Just noticed a rod attached to a ball joint at the roof pivot point on passenger side, the rod is about 4 inches long and isnt attached to anything inside the bodywork but it explains a rattle! Looking on REALOEM i can see its a gas pressurized spring, anyone know what it does? Before i go to the...

dazed

Fantastic, just wish i had the time to go through the 69 pages and growing, i'd like to know how it ends...

dazed

Better to trust someone who has actually changed this cable than a picture at the wrong angle :wink: Hey guess what? the liner came out with some persuasion and I got to the cable the bad news is the end of the cable that slides into the petrol flap is broken so it’s not long enough, so I put it al...

dazed

Hey... are you following me?

I'm a very trusting person.

dazed

Thanks for the replies

it seems i just needed to be a bit more firm with it, i'll have another go at the weekend. Although from the pic on the mud trap post i'm not sure thats going to get me to the petrol flap locking cable, but theres no where else it could be.
Cheers

dazed

You have PM

dazed

Hi I attempted to remove the rear wheel arch liner yesterday to get to the locking petrol cap cable & motor but after removing the wheel and all the small bolts i could see, the liner was loose but seemed to still be attached somewhere, almost like there were hidden clips that needed a good tug....

dazed

Ah non adjusting steering wheel? Well thats a good thing, i was sure it was supposed to be, shows what i know. :oops: The fuel flap lock though, i can feel the rod moving on the lock/unlock process but right now the rod doesnt line up with the hole in the filler neck so its moving the cable puller i...

dazed

Hi I picked up my new Zed on saturday and have been going over it - as you can imagine - and ive found a couple of things that i'd like to sort neither are real problems but i'd still like to sort them if possible. First the fuel flap doesnt lock, on closer inspection the release cable has been pull...

dazed

Some pics as promised.

dazed

I knew I'd be wrong and someone would put me right, thatll teach me for not checking! Its actually Topaz blue, sorry Ive been looking at too many colours for too long.

I'll add pics shortly
Thanks for the welcomes

dazed

Worth a shot...
I have a 2000 2.2
Dealer is trying to locate handbook and will post on but in the meantime and knowing he already has my money he's not likely to spend too long looking for it. Am happy for a PDF

Also looking for a wind deflector for the same if anyone has one spare?
Thanks

dazed

Hi all, after looking for the right 2.8 post face lift and missing out on a couple, yesterday i bought a Montreal Blue 2.2 with all the bits i wanted, well almost but i can track down the rest. Anyone have a wind deflector they dont want? :wink: I promise to make full use of the search function befo...

zroadster.net

Search found 42 matches

Z3 Front ABS Sensors x 2

Z3 Tonneau and Wind deflector (Roll Hoop version) FS

ABS / ASC Lights & Carsoft

Headlamp switch removal

2 x Silver Sainsburys Brentwood

Indy's in Essex / East London?

Z3 Tonneau cover wanted - Black

Roof gas pressurized spring

Wheelarch liner removal - How?

Locking petrol flap & Steering column adjust niggles

Wanted Wind deflector & Owners handbook - Z3

Hi Another new owner :)