Search found 486 matches

by Warrior
Tue 17 Oct, 2023 21:46
Forum: Boyz Toyz
Topic: Cheap hands free connection via radio..
Replies: 0
Views: 1675

Cheap hands free connection via radio..

Thought I'd give a heads up to a little 'Streetwize FM Bluetooth Transmitter' unit I bought from Euro Car Parts for the princely sum of £9.99, for those who like me are running an older in car radio/CD player. Plugs into the lighter socket, easy connection to a free FM Channel, Bluetoothed to phone....
by Warrior
Wed 23 Aug, 2023 09:26
Forum: Z3 roadster
Topic: Warning Lights appear and disappear on restart?
Replies: 5
Views: 16271

Re: Warning Lights appear and disappear on restart?

Thanks LaRy......

I've had ABS sensors, the YAW sensor and brake pedal sensor changed.

Will get the relay checked if it becomes a major issue 8-)
by Warrior
Sun 20 Aug, 2023 21:31
Forum: Z3 roadster
Topic: Warning Lights appear and disappear on restart?
Replies: 5
Views: 16271

Warning Lights appear and disappear on restart?

I had a couple of sensors changed last year and all seemed ok, but now, having not driven Zeddie much recently, both the traction control and brake warning lights appear on start up.

Turning the engine off and re-starting makes them disappear.

Is this a code reset issue or something else?
by Warrior
Sun 20 Aug, 2023 21:23
Forum: Z3 roadster
Topic: So So Sad
Replies: 15
Views: 18122

Re: So So Sad

The old saying ' a picture is worth a thousand words' is truer today than it ever was. A post saying that a particular Ceramic Polish is great has nothing against a decent photograph of a gleaming black Z3 before and after shot! The problem with forums that provide worthy information, as this one do...
by Warrior
Sat 15 Apr, 2023 11:18
Forum: Z3 roadster
Topic: Very lumpy, tick over + dropped revs on starting...
Replies: 6
Views: 16789

Re: Very lumpy, tick over + dropped revs on starting...

UPDATE: Bought a cheap code reader, which showed issues with lean fuel mixture, cleared the fault and sailed through the MOT yesterday. In addition something that I'd not taken much notice of, the off centre position of the temperature gauge needle, is now resolved and points due north when engine w...
by Warrior
Wed 12 Apr, 2023 22:17
Forum: Z3 roadster
Topic: Very lumpy, tick over + dropped revs on starting...
Replies: 6
Views: 16789

Re: Very lumpy, tick over + dropped revs on starting...

Thanks LaRay, will take a look later but meanwhile the new hose has sorted out the tick over, but left the ENGINE - emission values have deteriorated - warning light on the dash. I read from other threads that giving her a good run may clear the warning light but she's out of MOT, being sorted on Fr...
by Warrior
Tue 11 Apr, 2023 23:19
Forum: Z3 roadster
Topic: Very lumpy, tick over + dropped revs on starting...
Replies: 6
Views: 16789

Re: Very lumpy, tick over + dropped revs on starting...

Thanks LaRy, The top hose on the air filter was split underneath the jubilee clip holding it on so I effected a temporary repair with some Duck tape but if anything it got worse so removed it completely to find the other end in tatters. How the cars been running with it in that condition I don't kno...
by Warrior
Sun 09 Apr, 2023 11:27
Forum: Z3 roadster
Topic: Very lumpy, tick over + dropped revs on starting...
Replies: 6
Views: 16789

Very lumpy, tick over + dropped revs on starting...

My Z3 3.0i with 46k on the clock hasn't been driven much over the past 2 months but she's turned over on the key and been left to idle for 20 minutes on a regular basis. On starting yesterday she was very lumpy, warbling and struggling as if not all cylinders have kicked in. The rev counter jumps ba...
by Warrior
Fri 31 Mar, 2023 23:31
Forum: Z3 roadster
Topic: Rear window beading.
Replies: 7
Views: 16742

Re: Rear window beading.

I believe there is a replacement rear window that has a flap of material to glue down and cover the beading for cases where, like on my Z3, the material has frayed and parted company. From what I recall it wasn't particularly pretty. I'll see if I can find a link, which I think was on YouTube and fi...
by Warrior
Tue 10 Jan, 2023 00:24
Forum: Z3 roadster
Topic: FOR SALE: Stormforce Outdoor Cover for Z3
Replies: 0
Views: 2370

FOR SALE: Stormforce Outdoor Cover for Z3

I bought this a couple of years ago, put it on, took it off a couple of days later and put it back in the bag! It's a great cover but not a speedy job putting it on and taking it off hence the minimal use. In as new condition it comes in original storage bag with product labels still attached A new...
by Warrior
Mon 12 Dec, 2022 00:10
Forum: Stock exchange
Topic: Z3 hardtop and fixing kit
Replies: 2
Views: 1863

Re: Z3 hardtop and fixing kit

I've been looking for a while now but cannot bring myself to pay £500 for a fitting kit :D

What colour and where in the country are you?

If I see any i'll post again...
by Warrior
Mon 22 Aug, 2022 11:23
Forum: Z3 roadster
Topic: Air Con, cleaned and re gassed stops working?
Replies: 4
Views: 2763

Re: Air Con, cleaned and re gassed stops working?

Thanks Robert. Will check the fuse box properly.....

UPDATE: Double checked fuses and all look good to me.
by Warrior
Sun 21 Aug, 2022 20:07
Forum: Z3 roadster
Topic: Air Con, cleaned and re gassed stops working?
Replies: 4
Views: 2763

Air Con, cleaned and re gassed stops working?

Having got used to running with no aircon for some while I treated myself to a special clean and re-gas a couple of months ago. All worked fine until the last couple of trips, nothing....no cold air at all?

Any ideas as to what the problem may be?
by Warrior
Tue 17 May, 2022 20:56
Forum: Stock exchange
Topic: MoT Fail
Replies: 5
Views: 2901

Re: MoT Fail

Private Message sent Parki 8-)
by Warrior
Sun 01 May, 2022 22:38
Forum: Z3 roadster
Topic: Temperature gauge position?
Replies: 2
Views: 2619

Re: Temperature gauge position?

Thanks, i'll keep an eye on it...
by Warrior
Wed 20 Apr, 2022 23:52
Forum: Z3 roadster
Topic: Temperature gauge position?
Replies: 3
Views: 2923

Re: Temperature gauge position?

Many thanks.

Performance seems fine and as i'm doing only a few hundred miles a year wondered if a good run would help matters...
by Warrior
Wed 20 Apr, 2022 23:52
Forum: Z3 roadster
Topic: Temperature gauge position?
Replies: 3
Views: 2923

Re: Temperature gauge position?

Many thanks.

Performance seems fine and as i'm doing only a few hundred miles a year wondered if a good run would help matters...
by Warrior
Thu 14 Apr, 2022 22:34
Forum: Z3 roadster
Topic: Temperature gauge position?
Replies: 3
Views: 2923

Temperature gauge position?

I was always led to believe that the temperature gauge needle should, on reaching full operating temperature, sit perfectly vertical at 12 o'clock.

Mine used to and does eventually get there but sits at 11.55 for what feels like 2 or 3 times longer than before.

Anything to worry about?
by Warrior
Thu 14 Apr, 2022 22:33
Forum: Z3 roadster
Topic: Temperature gauge position?
Replies: 2
Views: 2619

Temperature gauge position?

I was always led to believe that the temperature gauge needle should, on reaching full operating temperature, sit perfectly vertical at 12 o'clock.

Mine used to and does eventually get there but sits at 11.55 for what feels like 2 or 3 times longer than before.

Anything to worry about?
by Warrior
Tue 29 Mar, 2022 00:33
Forum: Z3 roadster
Topic: Rear Window extrusion problems New Zealand
Replies: 11
Views: 5605

Re: Rear Window extrusion problems New Zealand

Thanks for sharing. My concern was that in the absence of the beading, the canvas could fray at the ends, making for a full hood replacement at some point. Have you noticed any fraying of the canvas at the edges, or is it holding up despite no beading? I haven't done anything yet. Like you I'm stil...
by Warrior
Sat 26 Mar, 2022 00:40
Forum: Z3 roadster
Topic: Rear Window extrusion problems New Zealand
Replies: 11
Views: 5605

Re: Rear Window extrusion problems New Zealand

Here's a video of the glue down window kit. About an inch out from the rubber bead is the line of stitching around the window that holds the zip to the roof. He can be seen stitching the zip back where it's broken away.

https://youtu.be/pTCr_PvTQyQ
by Warrior
Sat 26 Mar, 2022 00:15
Forum: Z3 roadster
Topic: Rear Window extrusion problems New Zealand
Replies: 11
Views: 5605

Re: Rear Window extrusion problems New Zealand

Just a couple of days ago I spoke to Dee at Soft Tops in Croydon and he gave me a full explanation of the issues and potential fixes for the Z3 rear window. On my roof the canvas that should tuck under the plastic bead has shrunk slightly and has pulled away in the corners. An OEM or like for like r...
by Warrior
Sun 20 Mar, 2022 23:40
Forum: Z3 roadster
Topic: Windscreen washers variable output?
Replies: 15
Views: 6148

Re: Windscreen washers variable output?

All sorted, well nearly.......but for the benefit of others who may have the same issues. The problem was just dirt and algae in the tank. The pumps were fine. The pumps pulled straight out of the tank with a little extra force. I temporarily sealed the holes where they came out using a couple of bo...
by Warrior
Thu 17 Mar, 2022 23:15
Forum: Z3 roadster
Topic: Windscreen washers variable output?
Replies: 15
Views: 6148

Re: Windscreen washers variable output?

Mike Fishwick wrote: Tue 15 Mar, 2022 09:24 Try heating the pipes with a hair dryer - once they become soft they should pull off easily.
Will do, thanks again...
by Warrior
Sat 12 Mar, 2022 00:58
Forum: Z3 roadster
Topic: Windscreen washers variable output?
Replies: 15
Views: 6148

Re: Windscreen washers variable output?

Take the nozzles off and leave them overnight in a solution of hot water and a dishwasher tablet. While this is going on, make sure that the pipes do not have non-return valves or filters fitted, and also check that the pump is delivering plenty of water when the pipes are partially covered with a ...
by Warrior
Mon 07 Mar, 2022 22:40
Forum: Z3 roadster
Topic: Windscreen washers variable output?
Replies: 15
Views: 6148

Re: Windscreen washers variable output?

Bumping this as still struggling! .. and that's where i'm stuck. I've managed to free it from the bulkhead but cannot for the life of me unclip the pipes and electrics (Pump?) from either side. I read elsewhere online that on older models with a single bolt fixing - mine has 2 - the pump can be pull...
by Warrior
Mon 07 Mar, 2022 22:40
Forum: Z3 roadster
Topic: Windscreen washers variable output?
Replies: 15
Views: 6148

Re: Windscreen washers variable output?

Bumping this as still struggling! .. and that's where i'm stuck. I've managed to free it from the bulkhead but cannot for the life of me unclip the pipes and electrics (Pump?) from either side. I read elsewhere online that on older models with a single bolt fixing - mine has 2 - the pump can be pull...
by Warrior
Tue 25 Jan, 2022 22:28
Forum: Z3 roadster
Topic: Any Z3 expertise near me?
Replies: 2
Views: 2273

Re: Any Z3 expertise near me?

There's a BMW Specialist who I've not used myself, but apparently is highly regarded, in the Chelmsford CM2 area.

https://www.dukesparkautomotive.co.uk/

I'll be giving them a look in the coming weeks so will give some feedback accordingly.
by Warrior
Tue 18 Jan, 2022 22:07
Forum: Z3 roadster
Topic: Windscreen washers variable output?
Replies: 15
Views: 6148

Re: Windscreen washers variable output?

Helping hand needed. Finally got round to having a proper look at the washer situation and here's where I am. Water is still making it's way to the nozzles so the pump is working - and can be heard. I've disconnected the pipe that runs along the wing and underneath the bonnet and the flow from the p...
by Warrior
Tue 04 Jan, 2022 14:34
Forum: Z3 roadster
Topic: Headlight lenses
Replies: 3
Views: 3264

Re: Headlight lenses

Has anybody tried Duxback headlight cleaner from Eurocarparts?

No sanding required, seems too good to be true?

https://youtu.be/cdlO7Ii30nU
by Warrior
Fri 08 Oct, 2021 22:13
Forum: The Gallery
Topic: Robert T Pics
Replies: 40
Views: 15296

Re: Robert T Pics

Nice one, I can't seem to drive anywhere without traffic and pot holes at the moment :)
by Warrior
Thu 12 Aug, 2021 00:23
Forum: Z3 roadster
Topic: Which Wiper Blades?
Replies: 8
Views: 2756

Re: Which Wiper Blades?

On Bosch's own parts finder they say AR20 U's: https://www.boschwiperblades.com/offers Eurocarparts are always putting out discount codes but you have to search for them sometimes. AR20U's at £16.49 can be brought down by 40% to £9.73 with the right code. I downloaded a free code finder called POUCH...
by Warrior
Tue 10 Aug, 2021 15:06
Forum: Z3 roadster
Topic: Which Wiper Blades?
Replies: 8
Views: 2756

Re: Which Wiper Blades?

Many thanks Pete..

Sounds the same as mine. They clear the screen extremely well and may even adapt themselves after a bit of sun and use so will hang in there. :P
by Warrior
Mon 02 Aug, 2021 01:03
Forum: Z3 roadster
Topic: Windscreen washers variable output?
Replies: 15
Views: 6148

Windscreen washers variable output?

The drivers side screen washer on my Z3 appear is only pushing the water in two jets that barely make it to the bottom of the screen. (Jets are at the correct angle to reach screen) On the passenger side one jet works as it should and hits the screen half way up, the other is blocked and cannot be c...
by Warrior
Mon 02 Aug, 2021 00:34
Forum: Z3 roadster
Topic: Which Wiper Blades?
Replies: 8
Views: 2756

Re: Which Wiper Blades?

I've just fitted a pair of Bosch AR20 U Aerotwins as recommended when entering car Reg number into the Bosch part finder. The drivers side one is fine and clears the windscreen well along the whole length. The passenger side however, does not touch the screen for about 4-5cms towards the outer edge?...
by Warrior
Mon 28 Jun, 2021 13:56
Forum: Z3 roadster
Topic: Which Wiper Blades?
Replies: 8
Views: 2756

Re: Which Wiper Blades?

petecossie wrote: Sat 26 Jun, 2021 20:48 I've had Bosch Aero wiper blades (front & rear screens) on my Z3 MC since 2013, I found them to be a bit more efficient than the OEM type of wiper blades. Also in my opinion they look better aswell.
Thanks. I'm hoping they won't collect quite as many leaves as well :lol:
by Warrior
Fri 25 Jun, 2021 20:50
Forum: Z3 roadster
Topic: Which Wiper Blades?
Replies: 8
Views: 2756

Which Wiper Blades?

Does anybody have any reason for or against changing the traditional framed wiper blades on a Z3 for the single blade frameless Bosch Aero's or similar?
by Warrior
Mon 24 May, 2021 21:51
Forum: Z3 roadster
Topic: Prices on the up
Replies: 9
Views: 5335

Re: Prices on the up

Higher prices seem to be very much attached to lower mileage. In some cases on cars that don't quite have the kerb appeal (wheels etc.,)
by Warrior
Wed 12 May, 2021 10:08
Forum: Z3 roadster
Topic: New convertible roof questions?
Replies: 15
Views: 4729

Re: New convertible roof questions?

Visited Dee at Soft Tops Croydon last week for a new black hood at £575 fitted. Really pleased with it - the hoods are hand made by Dee and are terrific quality. Having a new window makes all the difference too! l: Here's some pictures: https://live.staticflickr.com/65535/51157424622_1b25c34c5d_c.j...
by Warrior
Mon 12 Apr, 2021 21:33
Forum: Z1 roadster
Topic: new Battery?
Replies: 2
Views: 2152

Re: new Battery?

Sorry don't know what sort you need but Eurocarparts have offers on when you get through to the Checkout.

A Bosch S4 for my Z3 listed at £164.99 cost me just over £100 the other week. Now down to £97.34 with code POUCHBT41 Or Mid60
by Warrior
Fri 09 Apr, 2021 21:52
Forum: Z3 roadster
Topic: New convertible roof questions?
Replies: 15
Views: 4729

Re: New convertible roof questions?

Thanks for your feedback...

Will report back when sorted. Probably going with Soft Tops Croydon based on multiple reviews on all cars including Zeds...
by Warrior
Thu 08 Apr, 2021 12:30
Forum: Z3 roadster
Topic: New convertible roof questions?
Replies: 15
Views: 4729

New convertible roof questions?

Finally getting round to replacing the roof on my Z3 and have narrowed down the search to one made by Monsoon that uses Hartz fabric as used by BMW. Mine is a 2002 model with the air vents in the rear sides but Monsoon now only do the one without vents that I believe was fitted onto earlier models? ...
by Warrior
Fri 19 Feb, 2021 22:26
Forum: Z3 roadster
Topic: Battery dead and won't charge?
Replies: 4
Views: 2238

Re: Battery dead and won't charge?

Thankyou all........i'll follow all suggestions.

I was hoping to get another few months out of the battery in the hope that Lockdown restrictions will be eased.
by Warrior
Fri 19 Feb, 2021 00:30
Forum: Z3 roadster
Topic: Battery dead and won't charge?
Replies: 4
Views: 2238

Battery dead and won't charge?

Z3 3.0i automatic I left the car a little too long so not enough charge in the battery - 6 years old, a Bosch S3 - to start her. Fixed up the charger (which i've checked is working ok) left overnight and it's now completely drained. Not a whisper. Jump leads do nothing either. Dead as a Dodo. Any su...
by Warrior
Wed 17 Feb, 2021 18:35
Forum: The Lounge
Topic: Unseen Video Silverstone 2012 The Z1's
Replies: 1
Views: 5046

Unseen Video Silverstone 2012 The Z1's

Just found this in my PC Downloads folder so uploaded to YouTube.....

https://www.youtube.com/watch?v=W1Rjwh3Uaek

...a little longer
https://www.youtube.com/watch?v=wn5tElWgCwc



The rest: https://www.youtube.com/watch?v=RWf8_o0At_s
by Warrior
Sun 31 Jan, 2021 00:52
Forum: Let's talk
Topic: Gazza - sad news
Replies: 21
Views: 9600

Re: Gazza - sad news

Terribly sad news.

I only knew Gary as a moderator of, and contributor to, this forum but his willingness to help myself and countless others with advice wherever possible was always very much appreciated.

Condolences to family and friends.


RIP Gary
by Warrior
Fri 22 Jan, 2021 12:35
Forum: Z3 roadster
Topic: Condensation
Replies: 12
Views: 7516

Re: Condensation

These arrived and they've completely solved my condensation problem. They are huge compared to Pingi's. https://www.ebay.co.uk/itm/124061407611 I did put our office dehumidifier in the passenger side footwell first and run it for a couple of days until the windows were clear. Surprisingly, very litt...
by Warrior
Fri 01 Jan, 2021 22:59
Forum: Z3 roadster
Topic: Condensation
Replies: 12
Views: 7516

Re: Condensation

Update: I tried the dehumidifier from my business unit that just about fitted in the passenger side footwell. Ran it for 24 hours and every drop of condensation disappeared but there was barely a mug of water in the container. I've put the Pingi bags back in and so far no obvious signs of condensati...
by Warrior
Wed 30 Dec, 2020 11:47
Forum: Z3 roadster
Topic: Condensation
Replies: 12
Views: 7516

Re: Condensation

Revitalising this old post to see if anyone does use an electric dehumidifier and how they are getting on with it?

My earlier reply that the Pingi bags worked for me is somewhat dated and they don't keep up with the condensation issue all the time.
by Warrior
Tue 29 Dec, 2020 15:13
Forum: Z3 roadster
Topic: Engine outline warning lamp?
Replies: 14
Views: 6561

Re: Engine outline warning lamp?

For info, this is the hose that had the split in it - on the stubby bit on the side.

https://www.ebay.co.uk/itm/BMW-GENUINE- ... SwUYNaBEwC