zroadster.net

('_')Z3

From memory

('_')Z3

It pulls out about 35mm then the top as shown in photo is the bit you pull out.

('_')Z3

The black part slides out, on your picture you can see in the yellow plastic there is what looks like a rounded cut out. Pull the black and it slides a bit like a match box. It's used to hold the plugs together so they don't work loose. I've read this three times and it makes no sense :oops: :roll: ...

('_')Z3

boot and some string.. what's the big fuss. +1. I never understand why people get so het up that they refuse to even carry the spare. It's not as though it frees up any usable space, and I simply can't believe that there isn't any circumstance under which you wouldn't use the spare. If it was 3 in ...

('_')Z3

The person you have sent it to hasn't opened/read the message. It will stay in your outbox until they come on the site, see they have a message and open it!

('_')Z3

That's because the person you have sent it to has not yet opened it, when they do it will go.

('_')Z3

Tick the ones you want to delete then at the bottom of the page is a drop down box, I think it says mark/unmarked. Click on that and choose delete. And then click 'go' you'll be asked if you want to delete them, click yes! Voila

('_')Z3

These were the ones I was recommended by a previous buyer on the forum who was pleased with the quality, although I've not got round to purchasing them yet they are still in my watch list

('_')Z3

Brian H wrote:Sparco R100 and planted seat bases.

They look great Brian

('_')Z3

A blast from the past :oops: this thread. It's been so long since any updates :( The car has been stored for a quite a while and has only done 500 miles or so in the last 12months. So today was the day to finally break her out from under her covers, it burst in to life at the first time of asking 8-...

('_')Z3

Assuming your car is a face lifted model which is should be as a 2001 the connectors are different but there are plenty of threads on here to explain the process if you search :D it's pretty simple to do changing the connectors over if you're happy to use your old seats connectors as a donor. With r...

('_')Z3

The zips purely to replace the window

('_')Z3

There is a price list on their website, I presume if she's still got AC Schnitzer type iii racing alloys it's £115+vat each

('_')Z3

Black alcantara

('_')Z3

M3 cab e46

P.s meant to say 2005

43k miles

('_')Z3

johnz3 wrote:That is the OP's car

What does OP refer to please

Original poster

('_')Z3

and just to add a little difference, a new front lip spoiler, ready for the bumper and spoiler professional paint job: https://c2.staticflickr.com/6/5322/17465771598_90bd1c8192_h.jpg https://c2.staticflickr.com/6/5333/17467665689_efa3640465_b.jpg [/quote] I really like your spoiler :D , where's that...

('_')Z3

Thanks for the feedback all. April the 1st ? No No - but.... I've never seen a blue cow with black micro polka dots to make the leather from :!: Having established the leather question - any tips for a good leather feeder ? I was possibly thinking of slapping a load on and leaving it during the win...

('_')Z3

Evening folks. I'm lucky enough to have one of these interiors : http://i441.photobucket.com/albums/qq137/gookah/DublinMonitor022.jpg Looking to the future though I'd like to know if I'm sitting on (and caring for) PVC or real leather ? Sorry if this is a daft question but I'd feel even more daft r...

('_')Z3

pm sent

('_')Z3

Thanks ('_')Z3 for the heads up on the Schnitzer hoops I made offers straight away and won so really looking forward to them arriving. Might need some guidance in refitting them later. Anybody any idea how much they would cost new? they also have a central sub speaker and the surrounding rear trim....

('_')Z3

Now sold

anyone here?

('_')Z3

Absolutely nothing to do with me but a bit of a bargain

if you're after some

http://www.ebay.co.uk/itm/BMW-Z3-AC-Sch ... 4ae8507130

('_')Z3

Daz3 If you look on the gallery page you will see his progress thread a few up from the bottom of the first page. He tends to frequent .org more but is on there less than he used to be :( I'm still here :D life has got in the way of me finishing my project with buying a house and having a baby, but...

('_')Z3

Daz3

If you look on the gallery page you will see his progress thread a few up from the bottom of the first page. He tends to frequent .org more but is on there less than he used to be

('_')Z3

In the knowledge base

http://www.zroadster.net/forum/viewtopi ... 18&t=24160

('_')Z3

deni2s wrote:And another thing - are you sure it is Z3M? For me it looks more like pre-facelift wide body Z3 with Z3M side mirrors and side grilles.

Definitely an ///M

('_')Z3

There is a Z3 for sale on autotrader with the ac schnitzer hoops fitted, although the seller doesn't appear to realise there rarity as they are purely listed as chrome. Might be worth a phone call from someone to see if he'd swap them out :D http://www.autotrader.co.uk/classified/advert/201502191076...

('_')Z3

That's great thank you. I spoke to the local indie today and they said they would be reluctant to touch due the complicated nature of getting instructions for the procedure, and they've encountered problems in the past. But he did say if I took it along for them to have a look at they may take it on...

('_')Z3

All a short shifter is, is the gearlever with the fulcrum point moved further up the lever! Exactly. Looks like a very over-engineered piece of kit that nobody is going to see. Yes the exhaust, heatshield, fan & cowling and the propshaft have to come off and the rear of the gearbox has to be lo...

('_')Z3

I'm contemplating buying the above and was wondering if anyone had any experience of the AC Schnitzer short shifter? Does it make much of a difference? Is it easy to fit? Any advice appreciated

('_')Z3

When you put the new reg on you will send all the documentation off, certificate of entitlement, v5 and mot and you will receive a new mot with your new personalised reg.

('_')Z3

Be aware the Z3M rear wheel offset is markedly different to the 3.0, so they will stick out of the arches. The front will fit as normal though. Ah didn't know that, scuppers that plan then! I assumes as they are both widebody it would be ok.. Often none ///M cars are fitted with front ///M wheels o...

('_')Z3

johnz3 wrote:Cheers for that. How much please and where from. Possible picture.

Me

('_')Z3

The vehicle you are putting it on has to be taxed

('_')Z3

Ci wrote:Are these hazard warning light swtches difficult to fit? Does the whole centre console need to come out? Electrician or mechanic job. Dah!
Ci

Nah

you should be able to push it out from the gear stick hole or handbrake and it will just unplug. Easy peasy

('_')Z3

I think it was around 2006 that DPF's were added to diesel cars, these are generally good for 100k but will eventually stop regenerating and clog £1500 bill. So although diesel engines are good for 100k plus they will have draw backs. When i get rid of my Leon FR i won't be getting another diesel bu...

('_')Z3

You can carefully prise the cover off, it just pushes back in.

('_')Z3

Assuming it's the ///M style wheel There are two torx head bolts at 3 o clock and 9 o clock on the back of the wheel, undo these and the airbag can be eased forward to reveal the connectors. Unplug these and place the airbag somewhere safe, this exposes the nut that holds the wheel in place. Don't f...

('_')Z3

Brian H wrote:
('_')Z3 wrote:P.s if someone could add a pic

Ta

('_')Z3

Just come across this on eBay, seems like a good price for a great piece of kit. Seems to be new from the description, all for the princely sum of £180. This is nothing to do with me but thought someone might like to treat their Z this Christmas :D http://m.ebay.co.uk/itm/221594105625?nav=SEARCH P.s...

('_')Z3

http://www.zroadster.net/forum/viewtopi ... ay#p270615

('_')Z3

My car isn't here for me to look :( but I do have the old connectors that I bought from someone breaking a Z (this is the car loom side) in front of me. The black connector (heaters) has four wires 2 brown 1 red and white 1 green and white Other side 2 brown 1 yellow and white 1 blue and white But l...

('_')Z3

Just found the following on realOEM.com Labelled No.5 in the picture, might be what you need? No use to me now, as I've already chopped the connectors off. http://realoem.com/bmw/diagrams/x/h/131.png http://realoem.com/bmw/showparts.do?model=CM12&mospid=48078&btnr=61_1214&hg=61&fg=1...

('_')Z3

http://www.bimmerforums.co.uk/forum/f92 ... ls-t50353/

Think pangster fitted them to his Z3

('_')Z3

All Pm's replied

('_')Z3

I can take some

if you send your email address by pm i'll send some over if you're interested.

('_')Z3

I have for sale a genuine Z3 induction kit for sale. Strictly speaking it is a 3.0ltr variant, but I've had it fitted to my 2.0ltr. The difference being (I think :oops: ) is the 3.0ltr has a larger aperture to connect to the MAF but I simply added a silicone reduction hose and it fitted perfectly. S...

('_')Z3

A lovely looking car Tim, you must be itching to open her up

my neighbour has a white one, I was only speaking to him about it yesterday as he's just added some 'piggy back' module from USA to take it past 380bhp and also added a sports exhaust that sounds amazing!!! Enjoy

('_')Z3

Mirage do a nice range of stainless steel items for the Z engine bay if you have a look at their website. I bought the oil cap cover, you can see a pic on my thread.

http://www.zroadster.net/forum/viewtopi ... 32&t=34180

Search found 556 matches