F/S Z3 last few panels and twidley bits
- markrnorton
- Joined: Mon 05 Jan, 2009 13:19
- Posts: 841
- Location: Essex
F/S Z3 last few panels and twidley bits
last few bits left now - all prefacelift from 1.9 16v
just make me an offer, to clear now
PREFACELIFT BOOTLID, mint condition with brake light
PREFACELIFT REAR OFFSIDE QUARTER PANEL, mint condition
Brake servo and M/C
ABS PUMP
ABS module
ECU module
Nearside and centre air vents, black, mint condition
Floormats
Various switches
Pair of front hubs - excellent bearings no play
Inlet air temp sensor (new last year) - ideal if you are fitting aftermarket filter and removing airbox
and i think i have all the bmw handbooks if somebody wants them inc wallet
Mark
just make me an offer, to clear now
PREFACELIFT BOOTLID, mint condition with brake light
PREFACELIFT REAR OFFSIDE QUARTER PANEL, mint condition
Brake servo and M/C
ABS PUMP
ABS module
ECU module
Nearside and centre air vents, black, mint condition
Floormats
Various switches
Pair of front hubs - excellent bearings no play
Inlet air temp sensor (new last year) - ideal if you are fitting aftermarket filter and removing airbox
and i think i have all the bmw handbooks if somebody wants them inc wallet
Mark
Still modifying
- markrnorton
- Joined: Mon 05 Jan, 2009 13:19
- Posts: 841
- Location: Essex
-
- Joined: Wed 09 Jun, 2010 11:36
- Posts: 4
- RemarkLima
- Joined: Fri 08 Apr, 2011 13:22
- Posts: 271
- markrnorton
- Joined: Mon 05 Jan, 2009 13:19
- Posts: 841
- Location: Essex
- RemarkLima
- Joined: Fri 08 Apr, 2011 13:22
- Posts: 271
- markrnorton
- Joined: Mon 05 Jan, 2009 13:19
- Posts: 841
- Location: Essex
- markrnorton
- Joined: Mon 05 Jan, 2009 13:19
- Posts: 841
- Location: Essex
- markrnorton
- Joined: Mon 05 Jan, 2009 13:19
- Posts: 841
- Location: Essex
Need To Clear
I have also found passenger and central air vents and
the cargo net for the passenger footwell if anybody wants them
final bits need to go, I have no Z3 anymore so they are of no use to me. Come and collect, i still have a mint bootlid and driverside rear quarter, no dents, scratches or rust. Ideal for a replacement or spares !
the cargo net for the passenger footwell if anybody wants them
final bits need to go, I have no Z3 anymore so they are of no use to me. Come and collect, i still have a mint bootlid and driverside rear quarter, no dents, scratches or rust. Ideal for a replacement or spares !
Still modifying
re ecu module
Hi Mark,
Can you please tell me if you have the module in the lhs of the boot / rear quater valence area . What serial numbers are on yours and would you have 6 inches of the wire going to it and the plug as mine is badly corroded. Please let me know all the numbers on your and an idea of the price and I'll get back to you asap. Mine is 00 FACELIFT 2.0 MODEL so may be different.
Thank you sir.
Graham.
Can you please tell me if you have the module in the lhs of the boot / rear quater valence area . What serial numbers are on yours and would you have 6 inches of the wire going to it and the plug as mine is badly corroded. Please let me know all the numbers on your and an idea of the price and I'll get back to you asap. Mine is 00 FACELIFT 2.0 MODEL so may be different.
Thank you sir.
Graham.
- markrnorton
- Joined: Mon 05 Jan, 2009 13:19
- Posts: 841
- Location: Essex
Re: re ecu module
Hi the car is gone, so the bits above are all that is left, only ecu bits i have are from under the dash, passenger side and airbag moduleZedtree wrote:Hi Mark,
Can you please tell me if you have the module in the lhs of the boot / rear quater valence area . What serial numbers are on yours and would you have 6 inches of the wire going to it and the plug as mine is badly corroded. Please let me know all the numbers on your and an idea of the price and I'll get back to you asap. Mine is 00 FACELIFT 2.0 MODEL so may be different.
Thank you sir.
Graham.
Still modifying
re z3 is dead
Thanks Mark.
Hopefully someone on here has one. Only discovered today that mine had beed sitting in a pool of water behind the trim. Explains my electricial gremlins!!!
Cheers anyway mate.
Hopefully someone on here has one. Only discovered today that mine had beed sitting in a pool of water behind the trim. Explains my electricial gremlins!!!
Cheers anyway mate.
- markrnorton
- Joined: Mon 05 Jan, 2009 13:19
- Posts: 841
- Location: Essex
Re: re z3 is dead
water in the boots' not good ! or is it due to condensation ?Zedtree wrote:Thanks Mark.
Hopefully someone on here has one. Only discovered today that mine had beed sitting in a pool of water behind the trim. Explains my electricial gremlins!!!
Cheers anyway mate.
Still modifying
Water or condensation
I had an issue with some badly fitting rubber but think I cured it now plus I removed the grommets to let any excess water out so I shouldn't have any more problems hopefully, once I can replace the module in the boot that is. It has serial 55892110 on it.Hopefully someone has one handy.
Cheers again.
Cheers again.
ZEDTREE you have mail
Thanks Johnjo but never received any mail. Can you Pm me again please. Cheers.
- markrnorton
- Joined: Mon 05 Jan, 2009 13:19
- Posts: 841
- Location: Essex
- markrnorton
- Joined: Mon 05 Jan, 2009 13:19
- Posts: 841
- Location: Essex
- markrnorton
- Joined: Mon 05 Jan, 2009 13:19
- Posts: 841
- Location: Essex