New Project - Breaking Z3 1.9 artic silver narrow body

Whether you are having a garage clear-out, looking for a second-hand accessory, or buying/selling a Z, post your 'for sale' and 'wanted' ads here.
This Forum is not meant for discussion, please do not comment on the asking price.

Moderator: Gazza

spurs fan in a coupe
Joined: Fri 18 Apr, 2008 20:24
Posts: 1435

  Z3 coupe 2.8
Location: woking

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by spurs fan in a coupe » Sun 20 Apr, 2014 13:58

OXO driver's side is the same - sorry
we expres: " He did hear the bells ringing, but doesnt know where where the clapper hangs".

spurs fan in a coupe
Joined: Fri 18 Apr, 2008 20:24
Posts: 1435

  Z3 coupe 2.8
Location: woking

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by spurs fan in a coupe » Sun 20 Apr, 2014 14:00

Jarndyce wrote:Andy

I see the sills were provisionally sold, I take it they are both gone?

Peter
Hi Peter

Both sills are still available but are suffering from the usual rust at either end.

I can send you some pictures if you're after a project

Cheers
we expres: " He did hear the bells ringing, but doesnt know where where the clapper hangs".

Jarndyce
Joined: Sun 26 Jul, 2009 16:33
Posts: 16

  Z3 roadster 1.9
Location: Nottingham

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by Jarndyce » Sun 20 Apr, 2014 16:18

Thanks for the fast response. However I really don't need a "project" at the moment (decorating seems to be the major project on my good lady's itinerary)

I picked up a driver's side sill last week in fantastic condition and the right colour! The prospects of doing that with the passenger side sill are small.

Whilst looking for sills I saw a company called "Carbon Hood" who were offering fibreglass sills and a reasonable price per pair (£156) they were primed so there would still be the cost of painting. I wonder if any member has use them?

Once again thank you

Peter

Johnc
Joined: Fri 17 Sep, 2010 17:22
Posts: 22

  Z3 roadster 2.8
Location: Barry

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by Johnc » Sat 26 Apr, 2014 08:03

Have you the middle rear brake light fittings (boot mounted) need the strip with bulbs on and possibly the plastic backplate it clips into. Please PM asap ta

spurs fan in a coupe
Joined: Fri 18 Apr, 2008 20:24
Posts: 1435

  Z3 coupe 2.8
Location: woking

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by spurs fan in a coupe » Sat 26 Apr, 2014 19:15

Johnc wrote:Have you the middle rear brake light fittings (boot mounted) need the strip with bulbs on and possibly the plastic backplate it clips into. Please PM asap ta

Hi

I have this, a few bulbs, not all of them, I've not got the blanking cover that goes over the back of it.

Image

Image

Image

Image

Image

Image

Image
we expres: " He did hear the bells ringing, but doesnt know where where the clapper hangs".

Johnc
Joined: Fri 17 Sep, 2010 17:22
Posts: 22

  Z3 roadster 2.8
Location: Barry

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by Johnc » Sun 27 Apr, 2014 13:47

Thanks for a speedy response- it looks a bit worse for wear. Did it work when on the car and how many bulb holders do you have? I have a few badly corrided ones and would hope to make a full set from two iffy ones. What do you want for this item including p&p (including bilb holders), I am in south Wales.

thanks

john

spurs fan in a coupe
Joined: Fri 18 Apr, 2008 20:24
Posts: 1435

  Z3 coupe 2.8
Location: woking

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by spurs fan in a coupe » Sun 27 Apr, 2014 14:26

Johnc wrote:Thanks for a speedy response- it looks a bit worse for wear. Did it work when on the car and how many bulb holders do you have? I have a few badly corrided ones and would hope to make a full set from two iffy ones. What do you want for this item including p&p (including bilb holders), I am in south Wales.

thanks

john

PM sent
we expres: " He did hear the bells ringing, but doesnt know where where the clapper hangs".

spurs fan in a coupe
Joined: Fri 18 Apr, 2008 20:24
Posts: 1435

  Z3 coupe 2.8
Location: woking

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by spurs fan in a coupe » Sun 27 Apr, 2014 14:27

Last few requests for parts from this car please, it will be going next weekend I hope, so that I can make a proper start on the 1.9 with the nice ///M front bumper! :wink:

Cheers
we expres: " He did hear the bells ringing, but doesnt know where where the clapper hangs".

User avatar
BladeRunner919
Joined: Fri 17 Feb, 2012 20:18
Posts: 2220

  Z3 roadster 1.9

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by BladeRunner919 » Sun 27 Apr, 2014 20:51

Do either of the cars have an alarm with a sensor in the corners of the windscreen? I need one of the small plastic 'cups' that the sensors sit in.

spurs fan in a coupe
Joined: Fri 18 Apr, 2008 20:24
Posts: 1435

  Z3 coupe 2.8
Location: woking

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by spurs fan in a coupe » Sun 27 Apr, 2014 21:22

BladeRunner919 wrote:Do either of the cars have an alarm with a sensor in the corners of the windscreen? I need one of the small plastic 'cups' that the sensors sit in.
Not that I've noticed, but I'll check tomorrow
we expres: " He did hear the bells ringing, but doesnt know where where the clapper hangs".

bertiejaffa
Joined: Fri 26 Jul, 2013 10:28
Posts: 1715

  M roadster S50
Location: Manchester

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by bertiejaffa » Mon 28 Apr, 2014 00:01

and the trim quarter turn screws :wink:
Here come the girls.....
Image
My //M Refurb
My First Zed Journal

User avatar
sirius-c
Joined: Wed 12 Dec, 2012 22:24
Posts: 489

  Z3 roadster 2.8
Location: Eeh ba gum lad, 'ow do?

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by sirius-c » Mon 28 Apr, 2014 21:55

Do you have an outdoor temp sensor? Part number 65818350779

Sent from my Hudl HT7S3 using Tapatalk
1997 2.8L Z3 Roadster

Image

Designed or not designed, that is the question.

henrycrun
Joined: Wed 18 Apr, 2007 20:48
Posts: 519

  Z3 roadster 1.9
Location: WGC

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by henrycrun » Fri 02 May, 2014 13:12

and the headlight switch please ?

spurs fan in a coupe
Joined: Fri 18 Apr, 2008 20:24
Posts: 1435

  Z3 coupe 2.8
Location: woking

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by spurs fan in a coupe » Sun 20 Jul, 2014 21:35

Car will be going soon, still got

Tatty rear wings - £20 each collected from Woking, Surrey

Nice rear bumper - £25 collected viewtopic.php?f=11&t=41076

Tatty bonnet - on eBay for £200 will take an offer http://www.ebay.co.uk/itm/161364151297? ... 1555.l2649

Various doors - silver and boston green - £30 collected

Nice black leather seats and door cards - £175 collected viewtopic.php?f=11&t=40477

Roll hoops £200 collected = viewtopic.php?f=11&t=41186

Various shark fin side grilles including black with carbon badges £35 delivered - viewtopic.php?f=11&t=38844
Fuel pump sender - £50 delivered

Pre and post Rear lights - £30 delivered viewtopic.php?f=11&t=41075 viewtopic.php?f=11&t=41075

///M front bumper - £250 cash on collection or sensible offer viewtopic.php?f=11&t=40922 http://www.ebay.co.uk/itm/161345044361? ... 1555.l2649
we expres: " He did hear the bells ringing, but doesnt know where where the clapper hangs".

stupot50
Joined: Tue 07 Aug, 2012 09:35
Posts: 229

  Z3 roadster 2.8
Location: Torquay, Devon

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by stupot50 » Mon 21 Jul, 2014 10:40

Have you got an aerial booster from under the rear passenger side wing please?
1999 2.8 Arctic Silver Z3
1987 Black Renault Alpine GTA V6 Turbo
2007 325d Msport - remapped

spurs fan in a coupe
Joined: Fri 18 Apr, 2008 20:24
Posts: 1435

  Z3 coupe 2.8
Location: woking

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by spurs fan in a coupe » Mon 21 Jul, 2014 11:26

stupot50 wrote:Have you got an aerial booster from under the rear passenger side wing please?

Sorry aerial unit sold

Cheers
we expres: " He did hear the bells ringing, but doesnt know where where the clapper hangs".

spurs fan in a coupe
Joined: Fri 18 Apr, 2008 20:24
Posts: 1435

  Z3 coupe 2.8
Location: woking

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by spurs fan in a coupe » Mon 21 Jul, 2014 11:29

As per PM, driver's side rear wing

Image

Image

Image

Image

As stated, not in good condition
we expres: " He did hear the bells ringing, but doesnt know where where the clapper hangs".

Trevz3
Joined: Sun 20 Jul, 2014 21:14
Posts: 13

  blank

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by Trevz3 » Wed 23 Jul, 2014 08:48

Still got the drivers side sill ?

spurs fan in a coupe
Joined: Fri 18 Apr, 2008 20:24
Posts: 1435

  Z3 coupe 2.8
Location: woking

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by spurs fan in a coupe » Wed 23 Jul, 2014 11:34

Trevz3 wrote:Still got the drivers side sill ?

I'll check the condition when I get home

Cheers
we expres: " He did hear the bells ringing, but doesnt know where where the clapper hangs".

Trevz3
Joined: Sun 20 Jul, 2014 21:14
Posts: 13

  blank

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by Trevz3 » Wed 23 Jul, 2014 11:59

spurs fan in a coupe wrote:
Trevz3 wrote:Still got the drivers side sill ?

I'll check the condition when I get home

Cheers
Thanks ,mines dented at the front

spurs fan in a coupe
Joined: Fri 18 Apr, 2008 20:24
Posts: 1435

  Z3 coupe 2.8
Location: woking

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by spurs fan in a coupe » Wed 23 Jul, 2014 19:07

Driver's side sill.

In Silver quite rusty at front, usual inner patches front and back.

Image

Image

Image

Blue - better condition, haven't taken front mud flaps off yet, but still tell-tale inner rust on rear, despite seeming to be perfect from outside.

Image

Image

Image
we expres: " He did hear the bells ringing, but doesnt know where where the clapper hangs".

sebring
Joined: Thu 12 Dec, 2013 12:45
Posts: 39

  Z3 roadster 1.9

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by sebring » Fri 25 Jul, 2014 08:46

Hiya

Do you still have the storm gearknob?

spurs fan in a coupe
Joined: Fri 18 Apr, 2008 20:24
Posts: 1435

  Z3 coupe 2.8
Location: woking

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by spurs fan in a coupe » Fri 25 Jul, 2014 08:58

Sorry Storm knob was the first thing to go!
we expres: " He did hear the bells ringing, but doesnt know where where the clapper hangs".

Luke2015
Joined: Fri 18 Jul, 2014 09:36
Posts: 26

  Z3 roadster 2.8

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by Luke2015 » Fri 25 Jul, 2014 09:57

How much for the roof switch?

spurs fan in a coupe
Joined: Fri 18 Apr, 2008 20:24
Posts: 1435

  Z3 coupe 2.8
Location: woking

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by spurs fan in a coupe » Fri 25 Jul, 2014 17:43

Luke2015 wrote:How much for the roof switch?

I don't remember selling it, but when I dug out the ASC switch I couldn't find the roof one so maybe I did, I'll look again!
we expres: " He did hear the bells ringing, but doesnt know where where the clapper hangs".

Trevz3
Joined: Sun 20 Jul, 2014 21:14
Posts: 13

  blank

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by Trevz3 » Fri 25 Jul, 2014 17:55

How much including postage for the silver sill ?

Luke2015
Joined: Fri 18 Jul, 2014 09:36
Posts: 26

  Z3 roadster 2.8

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by Luke2015 » Fri 25 Jul, 2014 17:59

Ok mate no worries be great if you can find it!!

spurs fan in a coupe
Joined: Fri 18 Apr, 2008 20:24
Posts: 1435

  Z3 coupe 2.8
Location: woking

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by spurs fan in a coupe » Fri 25 Jul, 2014 19:20

Trevz3 wrote:How much including postage for the silver sill ?
Postage to where mate?
we expres: " He did hear the bells ringing, but doesnt know where where the clapper hangs".

Trevz3
Joined: Sun 20 Jul, 2014 21:14
Posts: 13

  blank

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by Trevz3 » Fri 25 Jul, 2014 19:37

spurs fan in a coupe wrote:
Trevz3 wrote:How much including postage for the silver sill ?
Postage to where mate?
sorry leicester

spurs fan in a coupe
Joined: Fri 18 Apr, 2008 20:24
Posts: 1435

  Z3 coupe 2.8
Location: woking

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by spurs fan in a coupe » Sat 26 Jul, 2014 07:05

Trevz3 wrote:
spurs fan in a coupe wrote:
Trevz3 wrote:How much including postage for the silver sill ?
Postage to where mate?
sorry leicester

Postage is expensive, I can do it all in for £35

Cheers

Andy
we expres: " He did hear the bells ringing, but doesnt know where where the clapper hangs".

pgunter66
Joined: Sat 05 Jul, 2014 21:53
Posts: 28

  Z3 roadster 2.2i
Location: Colden Common, Winchester, Hampshire, UK

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by pgunter66 » Sat 26 Jul, 2014 20:10

Hello,

You would not have part 18 on the boot trim would you on this RealOEM link ?

http://www.realoem.com/bmw/showparts.do ... g=51&fg=65

I am missing one and it just makes the boot look untidy !!

Regards

spurs fan in a coupe
Joined: Fri 18 Apr, 2008 20:24
Posts: 1435

  Z3 coupe 2.8
Location: woking

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by spurs fan in a coupe » Fri 01 Aug, 2014 20:49

pgunter66 wrote:Hello,

You would not have part 18 on the boot trim would you on this RealOEM link ?

http://www.realoem.com/bmw/showparts.do ... g=51&fg=65

I am missing one and it just makes the boot look untidy !!

Regards

Sorry for delay, I've been away

I only have this style trim being broken at the moment, sorry!

Andy

Image
we expres: " He did hear the bells ringing, but doesnt know where where the clapper hangs".

zee3zee3
Joined: Mon 28 Jul, 2014 08:19
Posts: 6

  Z3 roadster 2.8

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by zee3zee3 » Sat 02 Aug, 2014 13:21

HI have you a left side screen pillar cover looking for one with no marks in the black grey color think its called Swartz ? cheers

spurs fan in a coupe
Joined: Fri 18 Apr, 2008 20:24
Posts: 1435

  Z3 coupe 2.8
Location: woking

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by spurs fan in a coupe » Sat 02 Aug, 2014 20:06

zee3zee3 wrote:HI have you a left side screen pillar cover looking for one with no marks in the black grey color think its called Swartz ? cheers

Hi

I have this one.

Small mark at base as shown.

£13 delivered


Cheers

Image

Image
we expres: " He did hear the bells ringing, but doesnt know where where the clapper hangs".

Kondor
Joined: Fri 18 Jul, 2014 21:45
Posts: 33

  Z3 roadster 2.8

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by Kondor » Sun 03 Aug, 2014 11:53

Hi. Do you by any chance have an aerial base unit? I know someone was asking a while back, but I'm hoping... :(

Regards

Graham

spurs fan in a coupe
Joined: Fri 18 Apr, 2008 20:24
Posts: 1435

  Z3 coupe 2.8
Location: woking

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by spurs fan in a coupe » Tue 05 Aug, 2014 20:25

Kondor wrote:Hi. Do you by any chance have an aerial base unit? I know someone was asking a while back, but I'm hoping... :(

Regards

Graham
PM sent
we expres: " He did hear the bells ringing, but doesnt know where where the clapper hangs".

JJG
Joined: Sat 22 Jun, 2013 04:06
Posts: 82

  blank

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by JJG » Sat 09 Aug, 2014 02:23

On the the off chance I'm looking for the bolts at the bottom of the passenger and drivers side doors
They screw into a brace that keeps the window in the right position against the rubber seal.

spurs fan in a coupe
Joined: Fri 18 Apr, 2008 20:24
Posts: 1435

  Z3 coupe 2.8
Location: woking

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by spurs fan in a coupe » Sat 09 Aug, 2014 17:45

JJG wrote:On the the off chance I'm looking for the bolts at the bottom of the passenger and drivers side doors
They screw into a brace that keeps the window in the right position against the rubber seal.

These mate?

Image
we expres: " He did hear the bells ringing, but doesnt know where where the clapper hangs".

Rig sparky
Joined: Sun 02 Mar, 2014 18:12
Posts: 25

  Z3 roadster 1.9
Location: inverness

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by Rig sparky » Sat 09 Aug, 2014 18:23

Hi any chance you still have windscreen to roof seal need a good one as my left hand side has started leaking ? if so how much posted to inverness
cheers

spurs fan in a coupe
Joined: Fri 18 Apr, 2008 20:24
Posts: 1435

  Z3 coupe 2.8
Location: woking

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by spurs fan in a coupe » Sun 10 Aug, 2014 17:42

Rig sparky wrote:Hi any chance you still have windscreen to roof seal need a good one as my left hand side has started leaking ? if so how much posted to inverness
cheers

Is it this bit you're after?

The roof didn't leak and no signs of damage.

Image

Image

Image

Image
we expres: " He did hear the bells ringing, but doesnt know where where the clapper hangs".

spurs fan in a coupe
Joined: Fri 18 Apr, 2008 20:24
Posts: 1435

  Z3 coupe 2.8
Location: woking

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by spurs fan in a coupe » Sun 10 Aug, 2014 19:45

This car has now been scrapped, I'll be starting a new thread for the next one!
we expres: " He did hear the bells ringing, but doesnt know where where the clapper hangs".

GDZ3
Joined: Fri 22 Aug, 2014 18:01
Posts: 26

  Z3 roadster 3.0i

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by GDZ3 » Mon 25 Aug, 2014 14:17

Don't suppose you still have the roll hoops sitting in your shed do you ?.
Sorry for late enquiry, newbie to Z3 world.
GD
Who ever said 'it is better to have loved and lost' never had a divorce like mine...!

spurs fan in a coupe
Joined: Fri 18 Apr, 2008 20:24
Posts: 1435

  Z3 coupe 2.8
Location: woking

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by spurs fan in a coupe » Mon 25 Aug, 2014 15:14

GDZ3 wrote:Don't suppose you still have the roll hoops sitting in your shed do you ?.
Sorry for late enquiry, newbie to Z3 world.
PM sent
we expres: " He did hear the bells ringing, but doesnt know where where the clapper hangs".

woodsta888
Joined: Wed 25 May, 2011 10:26
Posts: 25

  Z3 roadster 2.0
Location: Exmouth

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by woodsta888 » Mon 25 Aug, 2014 17:09

Need a passenger window ASAP if you have one still or new one to break has turned up.

Cheers

spurs fan in a coupe
Joined: Fri 18 Apr, 2008 20:24
Posts: 1435

  Z3 coupe 2.8
Location: woking

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by spurs fan in a coupe » Mon 25 Aug, 2014 17:16

woodsta888 wrote:Need a passenger window ASAP if you have one still or new one to break has turned up.

Cheers

PM sent
we expres: " He did hear the bells ringing, but doesnt know where where the clapper hangs".

User avatar
g8jka
Z Register member
Joined: Sun 18 Apr, 2010 22:16
Posts: 1145

  Z3 roadster 2.8
Location: Telford

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by g8jka » Mon 15 Sep, 2014 14:12

spurs fan in a coupe wrote: Sorry I don't have one with the part no.

the 1.9 I'm breaking is - 34511164047

the 2.0 I'm breaking is - 34511164896

Cheers
Do you still have the ASC unit from the 2.0 available?

Cheers
2000 BMW Z3 2.8 Titanium Silver Roadster with too many mods to list :-D :drive
Image
Click For 2.0 Progress Journal
Click For 2.8 Progress Journal

User avatar
sirius-c
Joined: Wed 12 Dec, 2012 22:24
Posts: 489

  Z3 roadster 2.8
Location: Eeh ba gum lad, 'ow do?

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by sirius-c » Mon 15 Sep, 2014 14:23

do you still have the windscreen to soft top rubber seal as photo'd above?
1997 2.8L Z3 Roadster

Image

Designed or not designed, that is the question.

spurs fan in a coupe
Joined: Fri 18 Apr, 2008 20:24
Posts: 1435

  Z3 coupe 2.8
Location: woking

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by spurs fan in a coupe » Mon 15 Sep, 2014 19:03

sirius-c wrote:do you still have the windscreen to soft top rubber seal as photo'd above?
Yes
we expres: " He did hear the bells ringing, but doesnt know where where the clapper hangs".

spurs fan in a coupe
Joined: Fri 18 Apr, 2008 20:24
Posts: 1435

  Z3 coupe 2.8
Location: woking

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by spurs fan in a coupe » Mon 15 Sep, 2014 19:04

g8jka wrote:
spurs fan in a coupe wrote: Sorry I don't have one with the part no.

the 1.9 I'm breaking is - 34511164047

the 2.0 I'm breaking is - 34511164896

Cheers
Do you still have the ASC unit from the 2.0 available?

Cheers

I'll check, I sold one, but cant remember if it was the 2.0 or the 1.9.
we expres: " He did hear the bells ringing, but doesnt know where where the clapper hangs".

User avatar
sirius-c
Joined: Wed 12 Dec, 2012 22:24
Posts: 489

  Z3 roadster 2.8
Location: Eeh ba gum lad, 'ow do?

Re: New Project - Breaking Z3 1.9 artic silver narrow body

Post by sirius-c » Mon 15 Sep, 2014 19:54

spurs fan in a coupe wrote:
sirius-c wrote:do you still have the windscreen to soft top rubber seal as photo'd above?
Yes

How much inc p&p?
1997 2.8L Z3 Roadster

Image

Designed or not designed, that is the question.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest