HELP - Heated Seat Wiring

Post pictures of your car and discuss it here. One car per thread, and keep it on-topic, please!

Moderator: Gazza

Post Reply
leach62
Joined: Wed 31 Dec, 2008 11:43
Posts: 75

  Z3 roadster 2.0
Location: Chatham

HELP - Heated Seat Wiring

Post by leach62 » Mon 25 Apr, 2011 16:13

Hi All

I have been trying to find the wiring to fit the switches for heated seats that I am told is under the centre console. Can anyone tell me where to look and can you get to it without taking the cnetre console out. :head:

Thanks Regards Jim

swamper
Joined: Thu 13 May, 2010 18:14
Posts: 1866

  M roadster S50
Location: Mossley

Post by swamper » Mon 25 Apr, 2011 17:39

remove the gaiter from the gear stick....there usually under there or there abouts :wink:
the badness makes me do it...!

Image

leach62
Joined: Wed 31 Dec, 2008 11:43
Posts: 75

  Z3 roadster 2.0
Location: Chatham

Post by leach62 » Mon 25 Apr, 2011 18:39

Swamper

Thanks for that,I have been undoing bits and peering through the covers, its a jungle in there, I am hoping that the wiring will fit directly onto the switches.

swamper
Joined: Thu 13 May, 2010 18:14
Posts: 1866

  M roadster S50
Location: Mossley

Post by swamper » Mon 25 Apr, 2011 18:55

mine did........but there are 2 different type of switches

facelift on the left..

Image
the badness makes me do it...!

Image

User avatar
Ian_C
Joined: Sun 10 Dec, 2006 20:10
Posts: 2412

  Z3 roadster 2.8
Location: Lytham St Annes

Post by Ian_C » Mon 25 Apr, 2011 19:12

swamper wrote:remove the gaiter from the gear stick....there usually under there or there abouts :wink:
Like this (it's the 2 yellow connectors for the heated seats):
Image
Current...1998 ///M Coupe
Image
Previously...1997 Z3 2.8
Image

leach62
Joined: Wed 31 Dec, 2008 11:43
Posts: 75

  Z3 roadster 2.0
Location: Chatham

Post by leach62 » Mon 25 Apr, 2011 19:36

Thanks my red zed

I like pictures makes it easier for me, I have a facelift model and have face lift switches. Thanks for all your help

Regards Jim

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest