Progress! (fwj01's 2.0l - Oxford Green)

[fwj01]

Next on the list (after a set of spacers ) is a new set of these..... (The thingy that's got roadster written on it.. lol) The drivers side is really scruffy, will probably paint them same colour as the car, not decided yet... what do you guys think??

Just realised how dirty the inside of the door is... think I might go clean it

[Dave'z3]

I like the matte black touches, and my roadster thingies are looking a bit worn too

Need to know, how do you live with the car being THAT low????

I'm bad enough worrying about mine!

Regards,

Dave

[Z3cade]

Your zeds looking very smart

Love what you have done with the drop and M wheels...

Keep up the good work

[TitanTim]

The chrome on the sill finishers does tend to oxidise in places over time where moisture gets under the laquer finish.

Motormec do a set for £80 or so

http://www.motormec.co.uk/z3acc.html

Personally I wouldn't paint them as they will look awful IMHO

Tim.

[fwj01]

I like the matte black touches, and my roadster thingies are looking a bit worn too

Need to know, how do you live with the car being THAT low????

I'm bad enough worrying about mine!

Regards,

Dave

Haha gotta admit I was absolutely bricking it for the first two weeks or so!! Getting in to work is a nightmare because its speed bump heaven *scrape*scrape* but all is good , no damage made! A load of people from the VW and Audi scene drive a LOT lower than mine...!! I just need to stay off 'not on the map' crappy back roads lol! Real test will be going up to North Wales on Friday

Thanks for the info Tim!!

[Dave'z3]

Lol I couldn't do it. If my car scrapes on anything I want to cry, although the stance and look of your car is amazing!! Hopfully will get to see it at some point...

Good luck in Whey-als!

Dave

[fwj01]

Little update!







After these pics I spaced the fronts out 18mm, which isn't enough IMO but will do for now! I've also put a Pipercross filter on... the noise....


One of the pics took in the amazing weather today

[hornel Z3M]

Car really looks stunning, i love the stance of it and wouldnt have the nerve to do it to mine. Excellent, and if you ever drive over the bridge in the Z let me know, i only live 20 mins from there

[si-forks]

Looking better all the time still love your car you inspired me to drop my old 1.9 45mm all round best thing i have done so far still need to space out the rear wheels keep up the good work

[shantybeater]

Very nice

[///M_aniac]

Zed looks terrific. A real credit to you.

Looking at the pics remind me just how much I miss my old Z but she couldn't be in better hands with her new owner.

[Dave'z3]

That graffiti is awesome...I thought it had been photoshopped in! Like this car a lot.

[fwj01]

Thanks for the great comments guys!!

Hornel - Will let you know if I'm ever around your way, might take the long route up to the North next time I take the Z up home!

Another pic I've been playing around with!

[myredzed]

That's a fantastic pic! 2012 calendar shot?

[si-forks]

What a great picture do you take them ? because you have a great eye get that one up for the calendar it will get my vote

[Dave'z3]

Great new pic! I recon you should play with the exposure on the nose/headlight of the car to bring back some more of the detail. Or try to match it to the composition of the rest of the car.

Amazing stance.

[Guest]

Little update!







After these pics I spaced the fronts out 18mm, which isn't enough IMO but will do for now! I've also put a Pipercross filter on... the noise....


One of the pics took in the amazing weather today

I would like to see some extreme HDR versions of your images, can you have a go please?

[fwj01]

What a great picture do you take them ? because you have a great eye get that one up for the calendar it will get my vote

The pics are a team effort, the other half takes them and I do the editing. He's just got a new camera (Nikon D80) and I've managed to get my hands on his old Nikon D70, so I'm gonna stop being lazy and start taking some myself from now on!

I'll have a go at HDR next time I'm in a creative mood

[Guest]

Hope you did not mind, but wanted to see how it came out in HDR, used HDRtist Pro for a single image, I expect the results would be amazing with three exposure images, looks good though

[Guest]

And this one, gives a 3d definition to the rain.

[slacz]

Love the pics! Makes me wanna go out and shoot...

[fwj01]

Sooo this thread has been dead for a while, because zeddy has been off the road sad times.

Long story short, north Wales hates low cars

So this is the solution

Getting to work on it Saturday. More pics to follow!!


[url=http://www.flickr.com/photos/84592280@N03/7746502578/]
[url=http://www.flickr.com/photos/84592280@N03/7746502578/]

[Southernboy]

Damn good eye for setting, and professional editing / composing. It would be worth submitting to BMW for their calenders......who knows..

[shantybeater]

Great looking car, looking forward to seeing the difference on bags

[hornel Z3M]

I do love that car,,,,, Working down Bristol next week (Clifton) so will keep my eye open for it

[fwj01]

Some pics of this weekends work..









Hornel - you won't see it in bristol, I've moved back up to sunny north Wales!!

[billz]

Bang goes your shopping trips in it now
Car is looking amazing looks even better in the flesh. What do the bags raise and drop it too.
bill

[fwj01]

Bang goes your shopping trips in it now
Car is looking amazing looks even better in the flesh. What do the bags raise and drop it too.
bill

Yep!! thanks

The fronts are designed to sit at stock height when full of air and will drop 120mm

The rear bellow measures 58mm when empty and 196mm when full, so pretty sure i will get an extra 42mm drop from what it sits like at the minute.

Basically it will drop until it hits something I'd imagine

Should be all done by next weekend, weather depending!

[Heath]

Will it move up & down pretty quick or is it a steady pace and do you have numbered settings so you know what height its set at whilst driving ?
Your going to have to work out how low you can go whilst driving so nothing starts scraping.
When parked up I think its going to look great to have it sitting just a few mm off the floor.


Heath on Tapatalk

[fwj01]

It will be running on 1/4" lines so the airflow should be steady.

The management system is the Autopilot V2. It's a pressure based system as opposed to the kits with level sensors, which also benefits from..

8 pre-set heights, you can control each corner manually aswel.
Rise on start feature.
Leak sensor / onboard diagnostics & Compressor wear-down testing
User adjustable backlight on the controller pad
User adjustable compresor kick-on / cut-off pressures
Auto calibration
User adjustable unit of measurement (PSI/BAR)

[billz]

You will have to bring it to the Elan Valley Cruise that is posted up on another forum and let us ogle at it
bill

[fwj01]

Front now done and down

[fwj01]

So, FINALLY after a whole year!!!!!.... my baby is back on the road

I'm loving the air install, even though it's not as low as most people go for, I'd rather know I'd still have a car if anything ever went wrong!
The bags give quite a solid ride, but can be quite bouncy But it gets me over speed bumps and round the Welsh B-roads without scraping, so can't complain much! And taking passengers isn't as much of an earache as before!

I've also installed:
OEM Roll Hoops
H&R ARB's (front & rear)
HEL braided brake lines

Next on the list:
Bigger spacers for the front!!! (at least 25mm each side)
or
Maybe some new rims

Here are some pics, more to follow when/if we get some decent weather!

[Pierrick]

Wooooow that's low!!

[maurice the martian]

Cant wait to see it .we'll have to have a welsh cruise then we can all see it in action.
Moz

Sent from my GT-I9300 using Tapatalk 2

[Daz3]

Great stuff looking forward to seeing more pics. I have a pair of 25mm hubcentric spacers for sale

[si-forks]

As always love your car

Si-forks on tapatalk

[fwj01]

Thanks guys

Yes deffo in need of a n.wales cruise again! Is there one planned yet?

Great stuff looking forward to seeing more pics. I have a pair of 25mm hubcentric spacers for sale

I'll PM you regarding these, thanks!!

[maurice the martian]

[quote="fwj01"]Thanks guys

Yes deffo in need of a n.wales cruise again! Is there one planned yet?
No .but will av to sort one in the next few weeks.
Moz:grin:

Sent from my GT-I9300 using Tapatalk 2

[Jamezee]

Wooooow that's low!!

Just what I was thinking!

Hope to see it in the flesh sometime this year perhaps

[fwj01]

Tiny update! Got rid of the aerial

[Z3cade]

Where's it gone!...

It's a great looking zed..

[Pierrick]

?? are you never using the radio?? for 5£ you dould fit a small one and it would look good!

[fwj01]

?? are you never using the radio?? for 5£ you dould fit a small one and it would look good!

Nope... I've upgraded the head unit so always using the aux or ipod usb!! I used to have a stubby aerial but personally prefer the smooth look

[Pierrick]

Ok. This makes sens, as long as it doesn't leak.

[fwj01]

So..... Decided it was time to change the rims

(Dare RS's 10J all round)

Gutted I missed the Welsh cruise, hope someone sorts another one soon!

[maurice the martian]

Wheels an motor look great.To be honest its a good job u missed it , might have spoiled the new rims My zed took a battering ended up covered in sh*te .
Next one 30th June.
M

Sent from my GT-I9300 using Tapatalk 2