I am in need of a bit of technical information. I have just bought two new front indicators but the n/s is a bit out of alignment. It looks like you have to remove the headlight to adjust it. Has anyone had this problem or knows how to adjust the angle ? or how to remove the headlight? Any guidance would be appreciated.
Hope to see a few more Z1s at Gaydon this year. See you there.
Front Indicators
Hello Ian,
I will try to explain, how to remove the headlights of the Z1 and I hope you will understand my poor english...
First of all you have to open the back of the lights and disconnect the cables from the lights (high- and low beam)
Then you have to solve the screws at the case of lights.
The last one ist fixed from the lower surface! You will reach it, when you open the interior fender (is it correct?) in front of the front wheel and try to find it by grope inside the hole.
The position is approximately in the outside 1/3 a few centimeter behind the front edge of the head light. The scew has the same head as the other ones.
This screw you have to slove too, then you can slide the head light out of the holders....
I hope I could help you...
best regards
Michael
I will try to explain, how to remove the headlights of the Z1 and I hope you will understand my poor english...
First of all you have to open the back of the lights and disconnect the cables from the lights (high- and low beam)
Then you have to solve the screws at the case of lights.
The last one ist fixed from the lower surface! You will reach it, when you open the interior fender (is it correct?) in front of the front wheel and try to find it by grope inside the hole.
The position is approximately in the outside 1/3 a few centimeter behind the front edge of the head light. The scew has the same head as the other ones.
This screw you have to slove too, then you can slide the head light out of the holders....
I hope I could help you...
best regards
Michael