I imported my Z1 in the NL and during the import process we discovred that the left side rear fog light was broken. Or so we thought.
It turns out that in the RHD UK versions no fitting was placed in the LHD light for the rear fog light.
I am therefore looking for a Left hand side rear light assembly!!
Anybody can help?
thnx
Robert
LeftHand side Rear light assembly
Re: LeftHand side Rear light assembly
RHD UK version?bluejay wrote: It turns out that in the RHD UK versions no fitting was placed in the LHD light for the rear fog light.
There is a small modification in the rear light to accommodate fog, perhaps thats whats missing, as I thought all early cars were the same, aren't they?
Re: LeftHand side Rear light assembly
It's true that the LH fog light doesn't function on UK market cars, but I heard that the fitting is there, it just isn't wired in. No personal experience, may be totally wrong, but are you sure you need the whole part?
FOR: Balance
AGAINST: Yours will be in doubt at this price
- CAR Magazine's GBU summary of the Z1 in period
AGAINST: Yours will be in doubt at this price
- CAR Magazine's GBU summary of the Z1 in period
Re: LeftHand side Rear light assembly
There is indeed no fitting, thought had to get the whole part!!
And no its not RHD, my bad...
And no its not RHD, my bad...
Re: LeftHand side Rear light assembly
So managed to get a fitting for the light, but it is not wired to the main connectotrs.
Anybody knows what pin is needed to complete the circuit?
Thanks
Robert
Anybody knows what pin is needed to complete the circuit?
Thanks
Robert
Re: LeftHand side Rear light assembly
I "think" it is simply wired in parallel to the RHS, mine certainly seems to be.
Re: LeftHand side Rear light assembly
Hi,
E13 is the fog light
S9 is the switch
X10 is the connector (7 pin)
X38 is the switch connector
"194" is the line to the control symbol of the dashboard
Colors code are:
BR Brown
GE Yellow
GR Gray
OR Orange
SW Black
VI Violet
@S@P fluo
E13 is the fog light
S9 is the switch
X10 is the connector (7 pin)
X38 is the switch connector
"194" is the line to the control symbol of the dashboard
Colors code are:
BR Brown
GE Yellow
GR Gray
OR Orange
SW Black
VI Violet
@S@P fluo
Re: LeftHand side Rear light assembly
There is no pin in the position 6!!
Robert
Robert
Re: LeftHand side Rear light assembly
Hi,
Then add it from the other side.
Have you a switch in your z1?
@S@P fluo
Then add it from the other side.
Have you a switch in your z1?
@S@P fluo
Re: LeftHand side Rear light assembly
So I ran a cable from the right to the left side, only possible solution, beats me why there was no pin installed in position 6 from the factroy.
I did get a pin, but would have to cut open the assembly to fit.
Problem splved, although not entirely to my satisfaction
I did get a pin, but would have to cut open the assembly to fit.
Problem splved, although not entirely to my satisfaction