Front splitter for 2.8?
Front splitter for 2.8?
Just wondering if these parts are avalible from anywhere as i cant seem to find any???
any pics of peoples would be great
any pics of peoples would be great
///M Roadster - Evolve Stage 3
-
- Joined: Thu 02 Jun, 2011 14:54
- Posts: 82
I used some similar on a mates MGF a little tweeking and they looked good, or a good as a MGF can look!Z3cade wrote:well ive just found and ordered a set of universal corner splitters off fleebay... they may need slight modification but im up for the challenge! and at only £13 had to be worth a punt!!!
anyone also wanting a punt just type in 'universal splitters' on ebay.....
Im thinking about making a mould of these from glassfibre, i could them make a set in about 2 hours rather than a full day. At the moment it would not be practical to make sets from scratch sorry! The cost would be to much probably £200 rather than £80 if i make a mould. If i make a mould i could them also do carbon fibre ones that would be cool!!!!
Be worth looking into that as theres a gap in the market....jayson f wrote:Im thinking about making a mould of these from glassfibre, i could them make a set in about 2 hours rather than a full day. At the moment it would not be practical to make sets from scratch sorry! The cost would be to much probably £200 rather than £80 if i make a mould. If i make a mould i could them also do carbon fibre ones that would be cool!!!!
Anyhow ive just fitted my ebay specials!!
and if im honest they have come up superb... and at a cost of £9.99 i was expecting the worst but after alot of sanding then paint.... well see for yourselfs!!!
Im very pleased with them....
///M Roadster - Evolve Stage 3
Cade personally I think your car looks better without them. they look like an aftermarket Item from Lidal..sorryZ3cade wrote:Be worth looking into that as theres a gap in the market....jayson f wrote:Im thinking about making a mould of these from glassfibre, i could them make a set in about 2 hours rather than a full day. At the moment it would not be practical to make sets from scratch sorry! The cost would be to much probably £200 rather than £80 if i make a mould. If i make a mould i could them also do carbon fibre ones that would be cool!!!!
Anyhow ive just fitted my ebay specials!!
and if im honest they have come up superb... and at a cost of £9.99 i was expecting the worst but after alot of sanding then paint.... well see for yourselfs!!!
Im very pleased with them....
i think if these had been the original design i wouldn't have got them.
i think they look ok but you have a lovely zed and have made it look cheap .
Sorry not for me, but worth a punt at that price.
Spend the money and buy the real thing.
i think they look ok but you have a lovely zed and have made it look cheap .
Sorry not for me, but worth a punt at that price.
Spend the money and buy the real thing.
Please help. The money will go to a good cause. email me for the link to my fundraising page.
For what they cost i think they look good but yes i would rather have a set of ACS ones but where do you get them from and how much are they?????
If there £100+ then £50-£80 on a pro paint job on them id pesonally rather spend that amount of money on an M// front bumper....
///M Roadster - Evolve Stage 3
Sorry Z3cade, but I have to agree with the above two posts.
To me it looks like you have hit the curb or something and lost the bit that should be in the middle.
Other than that, you have a very smart Z3.
To me it looks like you have hit the curb or something and lost the bit that should be in the middle.
Other than that, you have a very smart Z3.
HT
Titan's apprentice.
Titan's apprentice.
http://www.lde.nu/index.htmTitan wrote:Occupations ?
Official Devil's Advocate
Leg Puller
Micky Taker
The M bumper has ACS splitters available alsoZ3cade wrote:
If there £100+ then £50-£80 on a pro paint job on them id pesonally rather spend that amount of money on an M// front bumper....
There not cheap link ( follow the drop down on top of page ) but quality costs.
Please help. The money will go to a good cause. email me for the link to my fundraising page.
HTH
http://preisliste.ac-schnitzer.de/acs_k ... 70975.html
Scroll down the page for the English bit.
http://preisliste.ac-schnitzer.de/acs_k ... 713720.pdf
http://preisliste.ac-schnitzer.de/acs_k ... 70975.html
Scroll down the page for the English bit.
http://preisliste.ac-schnitzer.de/acs_k ... 713720.pdf
HT
Titan's apprentice.
Titan's apprentice.
http://www.lde.nu/index.htmTitan wrote:Occupations ?
Official Devil's Advocate
Leg Puller
Micky Taker