Front splitter for 2.8?

Z3cade · Post by **Z3cade** » Wed 13 Jul, 2011 11:59

Just wondering if these parts are avalible from anywhere as i cant seem to find any???

any pics of peoples would be great

swamper · Post by **swamper** » Wed 13 Jul, 2011 14:59

canman has wide mouth splitters

Canman · Post by **Canman** » Wed 13 Jul, 2011 19:16

genuine ACS too

with 2.2 sport grill ..

Z3cade · Post by **Z3cade** » Wed 13 Jul, 2011 22:21

they would look lovely bolted straight onto mine

and wouldnt even have to paint them!!

very jelous..

Z3cade · Post by **Z3cade** » Wed 13 Jul, 2011 22:25

they would look lovely bolted straight onto mine

and wouldnt even have to paint them!!

very jelous..

Z3cade · Post by **Z3cade** » Thu 14 Jul, 2011 10:31

well ive just found and ordered a set of universal corner splitters off fleebay... they may need slight modification but im up for the challenge! and at only £13 had to be worth a punt!!!

anyone also wanting a punt just type in 'universal splitters' on ebay.....

z3chuckles · Post by **z3chuckles** » Fri 15 Jul, 2011 18:49

Z3cade wrote:well ive just found and ordered a set of universal corner splitters off fleebay... they may need slight modification but im up for the challenge! and at only £13 had to be worth a punt!!!

anyone also wanting a punt just type in 'universal splitters' on ebay.....

I used some similar on a mates MGF a little tweeking and they looked good, or a good as a MGF can look!

Catweazle · Post by **Catweazle** » Sat 16 Jul, 2011 21:08

You find the Splitters here

http://www.zettiworld.de/afterbuy/shop/ ... opid=60795

jayson f · Post by **jayson f** » Fri 22 Jul, 2011 22:53

I made mine from marine ply and fibreglass

Z3cade · Post by **Z3cade** » Sat 23 Jul, 2011 10:28

jayson they look great... wana make me a set!!?? id buy a set off you...

jayson f · Post by **jayson f** » Sat 23 Jul, 2011 14:54

Im thinking about making a mould of these from glassfibre, i could them make a set in about 2 hours rather than a full day. At the moment it would not be practical to make sets from scratch sorry!

The cost would be to much probably £200 rather than £80 if i make a mould. If i make a mould i could them also do carbon fibre ones that would be cool!!!!

Z3cade · Post by **Z3cade** » Sat 23 Jul, 2011 17:07

jayson f wrote:Im thinking about making a mould of these from glassfibre, i could them make a set in about 2 hours rather than a full day. At the moment it would not be practical to make sets from scratch sorry! The cost would be to much probably £200 rather than £80 if i make a mould. If i make a mould i could them also do carbon fibre ones that would be cool!!!!

Be worth looking into that as theres a gap in the market....

Anyhow ive just fitted my ebay specials!!
and if im honest they have come up superb... and at a cost of £9.99

i was expecting the worst but after alot of sanding then paint.... well see for yourselfs!!!
Im very pleased with them....

jayson f · Post by **jayson f** » Sat 23 Jul, 2011 17:57

Not bad you cant buy bugger all for £10 these days well done!

Bill- · Post by **Bill-** » Sat 23 Jul, 2011 18:41

Z3cade wrote:
jayson f wrote:Im thinking about making a mould of these from glassfibre, i could them make a set in about 2 hours rather than a full day. At the moment it would not be practical to make sets from scratch sorry! The cost would be to much probably £200 rather than £80 if i make a mould. If i make a mould i could them also do carbon fibre ones that would be cool!!!!
Be worth looking into that as theres a gap in the market....

Anyhow ive just fitted my ebay specials!!
and if im honest they have come up superb... and at a cost of £9.99 i was expecting the worst but after alot of sanding then paint.... well see for yourselfs!!!
Im very pleased with them....

Cade personally I think your car looks better without them. they look like an aftermarket Item from Lidal..sorry

Canman · Post by **Canman** » Sat 23 Jul, 2011 19:11

i think if these had been the original design i wouldn't have got them.
i think they look ok but you have a lovely zed and have made it look cheap .
Sorry not for me, but worth a punt at that price.
Spend the money and buy the real thing.

TitanTim · Post by **TitanTim** » Sat 23 Jul, 2011 20:07

Fair doos, you've done a great job with them but personally I'm with Kevan, not sure if its cos they look too thin and insubstantial compared to ACS splitters.

But don't let us put you off

if you like em thats all that matters

Tim.

Z3cade · Post by **Z3cade** » Sat 23 Jul, 2011 21:07

For what they cost i think they look good but yes i would rather have a set of ACS ones but where do you get them from and how much are they?????

If there £100+ then £50-£80 on a pro paint job on them id pesonally rather spend that amount of money on an M// front bumper....

Hard Top · Post by **Hard Top** » Sat 23 Jul, 2011 21:08

Sorry Z3cade, but I have to agree with the above two posts.
To me it looks like you have hit the curb or something and lost the bit that should be in the middle.
Other than that, you have a very smart Z3.

Canman · Post by **Canman** » Sat 23 Jul, 2011 21:29

Z3cade wrote:
If there £100+ then £50-£80 on a pro paint job on them id pesonally rather spend that amount of money on an M// front bumper....

The M bumper has ACS splitters available also

There not cheap link ( follow the drop down on top of page ) but quality costs.

Z3cade · Post by **Z3cade** » Sat 23 Jul, 2011 21:48

Booger when you said quality costs you werent kidding!

M// splitters are ridiculous.....

I could find 2.8 rear splitter at 117 but not the fronts

Canman · Post by **Canman** » Sun 24 Jul, 2011 07:58

hmmmm your right maybe they don't stock them anymore .. anyone ?

Hard Top · Post by **Hard Top** » Sun 24 Jul, 2011 10:39

HTH

http://preisliste.ac-schnitzer.de/acs_k ... 70975.html

Scroll down the page for the English bit.

http://preisliste.ac-schnitzer.de/acs_k ... 713720.pdf