front fogs retrofit

[Boosh]

Hi all,
A breaker near me is dismantling a z3. It has orange indicator lenses and side repeaters, but the pic isn't clear, so I can't see the reg or whether it has side lights on the bumper to determine its age (pre or post facelift). However, I can see it has front fogs, which my car (an '02) doesn't. Do you reckon pre facelift fogs will fit on a later model, or would it be a waste of money?
Thanks for the info,

Boosh.

[Southernboy]

All the fogs are the same...

[Boosh]

Thanks Barry,
Thought they might, but saw some on fleabay described as fitting up to '99 models, that puzzled me...
Let's start bargaining, then!
Thanks,

Boosh.

[Southernboy]

Just remember, you will also need the 2 little clip in covers... Once the lights are fitted, there are 2 little covers which clip in to conceal the fixing screws. Have a look on real OEM for the parts which are included in the fog light fitting so you can ensure you have all you will need to do the job.

[BonBon]

The aftermarket Halo Fogs are ten times nicer!

[BladeRunner919]

The aftermarket Halo Fogs are ten times ricer!

ftfy

[Boosh]

Southernboy, I understand the non-fog blanking plates can be cut to cover the fixing screws. However, I've got them included in the deal already, with screws/clips, relay, and switch. Should get me busy for an hour or so...
Thanks for the advice,

Boosh.