Another Alarm Question

UK forum for general and technical discussion about the Z3 roadster
Post Reply
Fender2004
Joined: Fri 14 Aug, 2009 10:24
Posts: 907

  Z3 roadster 2.8
Location: Houghton-Le-Spring

Another Alarm Question

Post by Fender2004 »

I'm trying to reset my 'brick type' unit. I read the guide on here and it states that you just pull the unit out of the car after removing the glove compartment. Well mine is solid and will not move at all. I was thinking of pushing a blade between the unit and the support shelf to see if it is glued in? unless anyone has any other ideas.

Image

I'm assuming that it is the black box at the top of the photo with the single wire coming out?
Image
Jonco
Joined: Sat 04 Jun, 2011 07:24
Posts: 402

  Z3 roadster 1.9
Location: Cheshire

Re: Another Alarm Question

Post by Jonco »

Yes that is the correct box - the black cable is the antenna - You have to loosen/remove the cradle to get it out.

This may be of use to you https://zroadster.org/articles/3g-ews-r ... amming.24/
Fender2004
Joined: Fri 14 Aug, 2009 10:24
Posts: 907

  Z3 roadster 2.8
Location: Houghton-Le-Spring

Re: Another Alarm Question

Post by Fender2004 »

Cheers thanks for that :D
Image
Post Reply