I cant get in ... help !

UK forum for general and technical discussion about the Z3 roadster
Post Reply
HomerRamone
Joined: Wed 30 Sep, 2015 11:35
Posts: 21

  Z3 roadster 2.8

I cant get in ... help !

Post by HomerRamone »

Anyone suggest a way to geti into my car. I shut the door earlier, possibly the seatbelt hadnt retracted properly - I see it sticking out of the bottom
the lock goes up and down but the handle wont open it.
Worse still the passenger door doesnt unlock (been like that since I got it and not gotten around to fixing it).
Id sooner not break the window but currently I see no other way of getting in :(
peter2b
Joined: Sat 01 Nov, 2014 18:47
Posts: 963

  Z3 roadster 2.2i
Location: cheshire

Re: I cant get in ... help !

Post by peter2b »

tried giving it a sharp pull, if you can get the door open a few mm try putting some thing in the gap to pry it open
peter2b
HomerRamone
Joined: Wed 30 Sep, 2015 11:35
Posts: 21

  Z3 roadster 2.8

Re: I cant get in ... help !

Post by HomerRamone »

Yeah tried that. tried using a pry bar to pull it open while someone lifted the handle up but it doesnt budge.
Whilst I see the wee silver deely going up n down - with either the remote or key in the lock I dont know if its actually operating the mechanism IYSWIM
User avatar
Deano1712
Z Register organiser
Joined: Sat 05 Aug, 2006 12:56
Posts: 1396

  M roadster S50
Location: Leeds

Re: I cant get in ... help !

Post by Deano1712 »

Try pushing the door hard and lift the handle. If the belt is trapped its going to be pushing the door outwards against the lock. You need to counter that force.
Z3M with a few mods...and a little bit more power
User avatar
Zed Free
Joined: Mon 12 Nov, 2012 20:23
Posts: 69

  Z3 roadster 2.2i

Re: I cant get in ... help !

Post by Zed Free »

Id agree with deano, had to do a similar thing on a friends boot when a bag strap got stuck in the lock area. Just be careful not to dent the door by pushing too hard.
Zed Free. - 2.2 Titanium Edition.
Image
HomerRamone
Joined: Wed 30 Sep, 2015 11:35
Posts: 21

  Z3 roadster 2.8

Re: I cant get in ... help !

Post by HomerRamone »

Yeah - you were right. Now sorted.

Thanks all

This however has made me increase the importance of fixing the other side !! I did actually get the door card off when I got the car a few months back but I could neither see the lock actuator nor get my hand in there and abandoned the attempt. Im guessing Ill need to take the glass out to replace the actuator
User avatar
BladeRunner919
Joined: Fri 17 Feb, 2012 20:18
Posts: 2225

  Z3 roadster 1.9

Re: I cant get in ... help !

Post by BladeRunner919 »

You don't have to take tha glass out - you need to put it all the way up and undo the window track so you can move it out of the way to gain access.
alec.m
Joined: Tue 05 Oct, 2010 19:01
Posts: 552

  Z3 roadster 2.8
Location: Lymington

Re: I cant get in ... help !

Post by alec.m »

In the knowledge base with pics HomerRamone

http://www.zroadster.net/forum/viewtopi ... 18&t=17528
HomerRamone
Joined: Wed 30 Sep, 2015 11:35
Posts: 21

  Z3 roadster 2.8

Re: I cant get in ... help !

Post by HomerRamone »

Sweet. (Though itll still have to wait a wee while - brass monkeys out there it is)
Post Reply