1st Remove radio.
Raise multipin clamp to unplug the connection. Its the black square @ rear left. The higher you raise it the more it pulls plug out.
Also unplug aerial.
Remove the Volume/On Off button. It just pulls off.
Now push in the 4 locking tags that hold the front on & pull off front.
On mine the multi pin plug had torn off leaving the plug connected. The soldering is very weak. How they expected it to stay on heaven knows.
Now this is the hard part, you have to resolder the pins back onto the board. I held with longnose pliars & soldered them but be carefull as one of mine
disappeared across the kitchen never to be found but luckily it still works OK
Its difficult lining up the pins to replace the black retaining block.
Or you could just go & get a modern one...!
Cheers Bob
