Headlight polishing

UK forum for general and technical discussion about the Z3 roadster

Moderator: Gazza

Post Reply
swabyk
Joined: Mon 18 Jul, 2016 18:38
Posts: 88

  Z3 roadster 1.9

Headlight polishing

Post by swabyk » Tue 19 Jul, 2016 20:07

Anyone used either of these products to remove the smokey headlight effect?

Watching the 2 videos on each page it seems the Autoglym one is far more detailed and processed in terms of the steps you have to do, the Meguiars one is quite simple, but is it as effective???

Both priced at £19.99, anyone used either?

Meguiars
http://www.halfords.com/motoring/car-cl ... ration-kit

Autoglym
http://www.halfords.com/motoring/car-cl ... mplete-kit

Thanks & Rgds
Ken

User avatar
colb
Joined: Sat 05 May, 2012 23:46
Posts: 586

  Z3 roadster 1.8 TU
Location: Newport South Wales UK

Re: Headlight polishing

Post by colb » Tue 19 Jul, 2016 20:26

Give them a good polishing using Brasso or Silver polishing fluid, probably best used with a small electric mop, cheaper than a kit and good results, I have used the method on motorcycle screen to get rid of scratches with good results.
Colb
1999 BMW 1.8 Z3
1998 Honda Deauville NT650V

Lewy
Joined: Mon 22 Oct, 2012 18:34
Posts: 203

  Z3 roadster 2.8
Location: Wolverhampton

Re: Headlight polishing

Post by Lewy » Tue 19 Jul, 2016 21:09

I'm halfway through restoring my M front lights with this from screwfix on the end of my Makita:

http://www.screwfix.com/p/toolpak-5-125 ... oCsOfw_wcB

So far so good :)

Sent from my SM-G925F using Tapatalk
Image

Flight
Joined: Mon 16 Sep, 2013 21:43
Posts: 81

  blank

Re: Headlight polishing

Post by Flight » Tue 19 Jul, 2016 22:07

Excellent results with 3M for little effort, good as new
Flight

handsomejackuk
Joined: Sat 18 Jun, 2016 11:35
Posts: 295

  Z3 roadster 1.9
Location: Blaenau Gwent South Wales...

Re: Headlight polishing

Post by handsomejackuk » Tue 19 Jul, 2016 23:16

yep same here any polish that has a cutting effect will do.. Brasso, tcut, silvo, i dont know about autsol that may work too, and made much easier if you have a small mop on a drill... use some water too to cool it down and not melt the plastic... i did try some upvc cleaner that seems to get the oxide off, but leaves the plastic a bit soft,basically i think its like acetone.. but be careful with it use on a small section first

User avatar
BladeRunner919
Joined: Fri 17 Feb, 2012 20:18
Posts: 2221

  Z3 roadster 1.9

Re: Headlight polishing

Post by BladeRunner919 » Wed 20 Jul, 2016 08:20

Flight wrote:Excellent results with 3M for little effort, good as new
Me too - very easy and great results.

abh29
Joined: Wed 06 Jun, 2012 10:48
Posts: 32

  Z3 roadster 2.2i

Re: Headlight polishing

Post by abh29 » Thu 21 Jul, 2016 17:49

Bought the Megs one about 3years ago , Just finished it off today on Z3 it was previously used on e61 when bought ,so done 2 sets of lights Very happy with it.
Z3 2.2 Sport Silver
X1

Mugs
Joined: Wed 07 Aug, 2013 02:26
Posts: 341

  Z3 roadster 1.9

Re: Headlight polishing

Post by Mugs » Fri 22 Jul, 2016 15:33

I used to do mine with 2500 wet and dry (used wet) then G3 cutting compound and a rotary polisher.
A little tip I learned was to use a polish like Autoglym super resin followed by a coating or two of wax to stop them clouding again. Just kept up the waxing and they were fine.
The first ones I did started to cloud again after a few months but with the polish and wax they were fine.

Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests