Unearthed my old badge bar I had on my Morgan and fitted it to the Z.
Cut out a couple of slots in the number plate surround and with a bit of fettling bolted it to the surround, had to drill a couple of holes in the bumper plastic to let the nuts sit in it so the surround sat flush to the bumper. Need a Z Badge now.
Badge Bar fitted
Badge Bar fitted
Colb
1999 BMW 1.8 Z3
2003 BMW 2.5 Z4
1998 Honda Deauville NT650V
1999 BMW 1.8 Z3
2003 BMW 2.5 Z4
1998 Honda Deauville NT650V
-
- Joined: Fri 12 Jun, 2009 12:11
- Posts: 252
- Location: Diss
Re: Badge Bar fitted
A nice big //M badge wou?d be good. (Im not trying to wind up certain M owners).
Re: Badge Bar fitted
Are badge bars even legal these days ?
Gazza
"Understeer is when you hit the wall with the front of the car, oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall and torque is how far you take the wall with you"
Z3 S54 M roadster , BMW Z1, BMW M3 CSL, Z4M Coupe
"Understeer is when you hit the wall with the front of the car, oversteer is when you hit the wall with the rear of the car. Horsepower is how fast you hit the wall and torque is how far you take the wall with you"
Z3 S54 M roadster , BMW Z1, BMW M3 CSL, Z4M Coupe
Re: Badge Bar fitted
Nothing in the Construction and Use Regulations pertaining to Badge Bars, don't confuse them with Bull Bars that were fitted to 4x4's and considered a danger to pedestrians. You will draw attention to yourself if you fit mascots to the bonnet which could cause injury to a person in a collision. Badge Bars in common use on such makes as Morgan, in fact you can order one with your new car as an extra if you can afford the car and the badge bar, badges come extra!!
Colb
1999 BMW 1.8 Z3
2003 BMW 2.5 Z4
1998 Honda Deauville NT650V
1999 BMW 1.8 Z3
2003 BMW 2.5 Z4
1998 Honda Deauville NT650V