Seats

For the M Powered Z3 derivatives
Post Reply
Gooseacre
Joined: Thu 10 May, 2012 18:18
Posts: 152

  M roadster S50

Seats

Post by Gooseacre »

After some advice all...

Left it a little long before doing anything and now my drive seat bolster has a small tear. Rest of seats good nick.

Any suggestions for fixing. Restoration? Anyone know someone reliable and not too pricy. I am in South Buckinghamshire.

Thanks all.

Image
Image
2001 Z3M S54 LB64010 #10/73
Image
gookah
Z Register member
Joined: Thu 07 Aug, 2008 09:51
Posts: 2737

  Z3 roadster 2.8

Re: Seats

Post by gookah »

see my journal below my photo for extra details..... but as below...
gookah wrote:Bought some Scuffmaster in Estoril blue:
Image

I also bought a leather repair kit, slid a 'repair patch' underneath the rip, applied the glue, then held it together for 2 mins and left it for an hour.
Cleaned the leather with the cleaner from the repair kit then applied the Scuffmaster by dabbing it on with a sponge.

This was the drivers side, and was after just one coat,

Image Image
I will do another coat tomorrow, then onto the passenger side which is no where near as bad.

a view from afar:
Image
Impressed is not an adequate enough word for how I feel...
Image

Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)

I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Alan W
Joined: Thu 20 Jun, 2013 10:56
Posts: 670

  Z3 roadster 2.8
Location: Bexley, Kent UK

Re: Seats

Post by Alan W »

Wow, that is really impressive!!!!!!!!!!!!!!!!!!!
1999 facelit Z3 Roadster 2.8 Auto in Cosmos Black aka 'Gloria'
Image
Gooseacre
Joined: Thu 10 May, 2012 18:18
Posts: 152

  M roadster S50

Re: Seats

Post by Gooseacre »

Stunning is the word!

Got to get me some of that. And a fair bit of elbow grease I'm sure.

Will share how I get on!
2001 Z3M S54 LB64010 #10/73
Image
gookah
Z Register member
Joined: Thu 07 Aug, 2008 09:51
Posts: 2737

  Z3 roadster 2.8

Re: Seats

Post by gookah »

Gooseacre wrote:Stunning is the word!

Got to get me some of that. And a fair bit of elbow grease I'm sure.

Will share how I get on!
Elbow grease was not required in the slightest..
Image

Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)

I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
User avatar
Southernboy
Joined: Thu 07 Oct, 2010 12:39
Posts: 6436

  Z3 roadster 3.0i
Location: Johannesburg

Re: Seats

Post by Southernboy »

Gookah wrote;
Elbow grease was not required in the slightest..

That's because his cousin Shaun did it for him... :D
"Normal is overrated"
Image

Z3 Upgrades and Additions
Gooseacre
Joined: Thu 10 May, 2012 18:18
Posts: 152

  M roadster S50

Re: Seats

Post by Gooseacre »

Can cousin Shaun do mine as well?
2001 Z3M S54 LB64010 #10/73
Image
Post Reply