Jonesy's Z3 Build Thread (U/D 23/06/11)
Jonesy's Z3 Build Thread (U/D 23/06/11)
ok well this is a work in progress style thread to show you guys whats going on with my Z3.
The Z3 as i got it:
The first job on the (ever growing) to do list was the retrofitting of chrome roll bars and a clear acrylic wind deflector.
I think the bars look really good, as the Z's without roll hoops just look abit unfinished to me.
the clear acrylic wind deflecter works well for shorter people as my girlfriend now doesnt complain about the wind messing up her hair untill around 85MPH wheras before we struggled to reach 50 without complaints. but im a 6" lad so my head already pops over the windscreen, does make a noticable differance when the windows are up though.
no noticable effect on mpg or speed on the other hand, so thats a bonus
The Z3 as i got it:
The first job on the (ever growing) to do list was the retrofitting of chrome roll bars and a clear acrylic wind deflector.
I think the bars look really good, as the Z's without roll hoops just look abit unfinished to me.
the clear acrylic wind deflecter works well for shorter people as my girlfriend now doesnt complain about the wind messing up her hair untill around 85MPH wheras before we struggled to reach 50 without complaints. but im a 6" lad so my head already pops over the windscreen, does make a noticable differance when the windows are up though.
no noticable effect on mpg or speed on the other hand, so thats a bonus
Last edited by Jonesy on Thu 23 Jun, 2011 20:33, edited 3 times in total.
Luke Jones
Okay so my BMW Park Lane London Tax disk holder arrived in the post today, approximately 16 hours after paying for it on ebay (pleased )
so quickly braved today's rainy morning to stick it on in replacement of the KIA holder, the car was owned by a KIA dealers wife previously. so an neccesary swap in my book.
here it is (apologies for camera phone picture, my camera had no charge)
fitted (now the weather has cleared out):
much more OEM than before, korean tax disk holder is just so KDM, lol
so quickly braved today's rainy morning to stick it on in replacement of the KIA holder, the car was owned by a KIA dealers wife previously. so an neccesary swap in my book.
here it is (apologies for camera phone picture, my camera had no charge)
fitted (now the weather has cleared out):
much more OEM than before, korean tax disk holder is just so KDM, lol
Last edited by Jonesy on Sat 11 Sep, 2010 15:46, edited 4 times in total.
Luke Jones
Right well next on my list of things to do is get a personalised number plate sorted, there are two im am looking at for the moment and one is much more (too) expensive than the other.
L J60NES = £599
JO09NSY = £850
I'm hoping to bring some unspent holiday money back in two weeks which would be nice as I'm allowing myself to spend US$75.00 a day which I don't think I will...
Your opinions on a postcard please
L J60NES = £599
JO09NSY = £850
I'm hoping to bring some unspent holiday money back in two weeks which would be nice as I'm allowing myself to spend US$75.00 a day which I don't think I will...
Your opinions on a postcard please
Last edited by Jonesy on Sat 11 Sep, 2010 15:57, edited 1 time in total.
Luke Jones
-
- Joined: Sat 22 May, 2010 17:16
- Posts: 195
- Location: Leeds
Black Diamond pads are on offer here if you buy them at the same time as the Black Diamond discs. Got mine sitting in the front room waiting to be fitted.Jonesy wrote:*Black Diamond Front & Rear Brake Disks ---------|N/N|---------- £ 270.00
*Black Diamond Front & Rear Predator Pads -------|N/N|---------- £ 90.00
lots of hours research so far, very little action though purely due to financial constraints. but better to be prepered eh?
hopefully will be able to do at least one thing on the list every month. althrough some of those are biggies
if anyone has any useful info like vikingsven's i'd be interested to know. i have been rather conservative with my prices so that i'm sure i can afford the mods, as opposed to realising that i can't do a certain one and being stuck for £'s so hopefully i can be pointed in the direction of the best prices
hopefully will be able to do at least one thing on the list every month. althrough some of those are biggies
if anyone has any useful info like vikingsven's i'd be interested to know. i have been rather conservative with my prices so that i'm sure i can afford the mods, as opposed to realising that i can't do a certain one and being stuck for £'s so hopefully i can be pointed in the direction of the best prices
Luke Jones
-
- Joined: Mon 15 Feb, 2010 19:57
- Posts: 490
- Location: Manchester
-
- Joined: Mon 15 Feb, 2010 19:57
- Posts: 490
- Location: Manchester
got it through a reccomended website from justroadster.com cant remember the actual one, just e-mail their sales team and they will let ya know.
weld quality is okay, i didnt think it was very good to begin with but because of the placment of them, they arn't really noticable on the car, especially with the deflector fitted.
cost circa £200 for it shipped from / through china.
weld quality is okay, i didnt think it was very good to begin with but because of the placment of them, they arn't really noticable on the car, especially with the deflector fitted.
cost circa £200 for it shipped from / through china.
Luke Jones
Luke liking your ideas but careful mate with the letter/number spacing on the plates as they are illegal and you could get points on your liscence by a strict policeperson and the BMW badge on the left is a big no no too with the law. also the number plate must have a postcode from the place of manufacture at the bottom.Jonesy wrote:so i have now found some "legal" plates that i like, comments and reccomendations welcome:
these are all the bargain price of £250!
your MOT inspector will also fail your zed with incorrect spacing etc.
on saying that mine doesn't have the postcode but have zroadster.net
good luck with your mod's
Please help. The money will go to a good cause. email me for the link to my fundraising page.
my perception was a £60 fine and the dvla can withraw the issue of the private plate if they so wish. if i had a illegally spaced plate, i would run with legal ones in the boot just in case mr plod takes a dislike.. at which time i'd give him the puppy dog eyes and swap the plates over n hope that does the trick
(would swap the plates mot time too)
whats wrong with the bmw badge? only allowed nationality flags or similar?
Luke
(would swap the plates mot time too)
whats wrong with the bmw badge? only allowed nationality flags or similar?
Luke
Luke Jones
Well time for an update as its been a long long time since my last one. Not alot has changed really except for the private number plate, but I took an hour out this evening to give it a good clean (no polish though, started to get dark) anyway heres the pics (excuse the phone camera pictures, don't do it justice ):
+ I Paid My Insurance in full yesterday which cost me £870 Fully Comp With Elephant instead of £2100 with admiral like last year which leaves me with the best part of £200 a month spare for mods
Hopefully more updates soon!
+ I Paid My Insurance in full yesterday which cost me £870 Fully Comp With Elephant instead of £2100 with admiral like last year which leaves me with the best part of £200 a month spare for mods
Hopefully more updates soon!
Luke Jones
-
- Joined: Fri 18 Apr, 2008 19:24
- Posts: 1446
- Location: woking
Looks like my drive, err apart from the colours. Nice looking pair you have!
BMW Z3 2.0 Titan Silver - Progress Thread
(Pictures - http://s852.photobucket.com/home/gazhyde/allalbums)
(Pictures - http://s852.photobucket.com/home/gazhyde/allalbums)
Nice motor, glad to see you also have the same roll hoops. I agree the quality of the product and welds is good, let down only by the finish. I polished all the welds up on mine using my dremel, and they look great now.
One thing i did notice is that they stiffen up the back end of the car and make the handling more positive. makes sense really as they span the two welded joints of the outside of the car.
One thing i did notice is that they stiffen up the back end of the car and make the handling more positive. makes sense really as they span the two welded joints of the outside of the car.
-
- Joined: Wed 12 Mar, 2008 14:33
- Posts: 1967
- Location: UK
Cars looking very clean whats next on the mod list?
Progress Thread:http://www.zroadster.net/forum/viewtopi ... 32&t=36117
Previous - S54 M Roadster, S50 M Roadster, Ibiza Cupra IHI 340bhp, Ibiza Cupra K04 270bhp, 6n2 Polo GTi
well i've dropped the rediculous mod list and have opted to go a little more covert/subtle...
next job is an oil service at my local indy - around £100
then looking at better, bmw wheels - around £400
& Hopefully eisenmann exhaust - around £700 all in and fitted
but thats about it for now
next job is an oil service at my local indy - around £100
then looking at better, bmw wheels - around £400
& Hopefully eisenmann exhaust - around £700 all in and fitted
but thats about it for now
Luke Jones
time for an update, the suspension has now been lowered. thats 30mm at the rear and 45mm on the front. £70 delivered springs off of eBay seem to be more comforatble than my standard spings were. Also now have 13mm spacers on the rears to fill the arch a bit better
before:
after:
& a few more different angles:
and my favourite:
[/b]
let me know what you think. have to say the pictures dont really do it justice (cameraphone)
before:
after:
& a few more different angles:
and my favourite:
[/b]
let me know what you think. have to say the pictures dont really do it justice (cameraphone)
Luke Jones
Looking good, but in pic six it looks like your right gill is knackered?
I have a set of brand new OEM chrome gills if you are interested.
I have a set of brand new OEM chrome gills if you are interested.
HT
Titan's apprentice.
Titan's apprentice.
http://www.lde.nu/index.htmTitan wrote:Occupations ?
Official Devil's Advocate
Leg Puller
Micky Taker
Jonesy wrote:Not quite sure what your seeing as its completely fine :s but thanks anyway
HT
Titan's apprentice.
Titan's apprentice.
http://www.lde.nu/index.htmTitan wrote:Occupations ?
Official Devil's Advocate
Leg Puller
Micky Taker
I will get me coat...
HT
Titan's apprentice.
Titan's apprentice.
http://www.lde.nu/index.htmTitan wrote:Occupations ?
Official Devil's Advocate
Leg Puller
Micky Taker
Jonesy's Z3 Build Thread (U/D 23/06/11)
Luke Jones