wheels

UK forum for general and technical discussion about the Z3 roadster
Post Reply
wifevanda
Joined: Mon 09 Aug, 2010 19:36
Posts: 56

  Z3 roadster 2.0
Location: dagenham

wheels

Post by wifevanda »

hi im looking at a set of bmw mv1 staggered 8 and 8.5 wheels two quick questions,1 will they fit 2 can i use my 16 wheel nuts thanks for any repleys .
User avatar
Ian_C
Joined: Sun 10 Dec, 2006 20:10
Posts: 2415

  Z3 roadster 2.8
Location: Lytham St Annes

Re: wheels

Post by Ian_C »

It really depends on the offsets of the new wheels, do you have them to hand so that we can advise? Existing wheel nuts will be fine.
Current...1998 ///M Coupe
Image
Previously...1997 Z3 2.8
Image
wifevanda
Joined: Mon 09 Aug, 2010 19:36
Posts: 56

  Z3 roadster 2.0
Location: dagenham

Re: wheels

Post by wifevanda »

advert just says fits e36 e46 e39 should i ask for further details./ie ofset
Zed Carer
Joined: Thu 13 Dec, 2007 20:27
Posts: 1642

  Z3 roadster 2.8
Location: Wakefield

Re: wheels

Post by Zed Carer »

wifevanda wrote:advert just says fits e36 e46 e39 should i ask for further details./ie ofset
e36 and e46 wheels "should" fit a Z3 but not sure about those from an e39 as I think that 5 Series generally have smaller offsets - best to ask for the actual offsets.
Hers: Z4 2.0i Sp --------------------- His: Z3 2.8
Image
User avatar
si-forks
Joined: Fri 08 Oct, 2010 17:38
Posts: 514

  Z3 roadster 1.9
Location: worcester

Re: wheels

Post by si-forks »

E39 will not fit Z3 centre bore different

Si-forks on tapatalk
E30 318 1988 Gone
E36 320 1992 Gone

E36 328 1995 write off

E39 525d M Sport 2003 Current
E37 Z3 M44B1.9 1997 Current
jenmark
Joined: Fri 17 Sep, 2010 15:36
Posts: 79

  Z3 roadster 2.8
Location: wolverhampton

Re: wheels

Post by jenmark »

Hi there mate i have a set of genuine bmw staggered mv1 alloys on my facelift 2000 model,
they fit no problem, the only other thing i did was put 15mm wheel spacers on the rear they
a very nice wheel and suit the Z, hope that helps.
wifevanda
Joined: Mon 09 Aug, 2010 19:36
Posts: 56

  Z3 roadster 2.0
Location: dagenham

Re: wheels

Post by wifevanda »

thanks for all your help
wifevanda
Joined: Mon 09 Aug, 2010 19:36
Posts: 56

  Z3 roadster 2.0
Location: dagenham

Re: wheels

Post by wifevanda »

hi still looking for a set of wheels.im a bit of a thicko ,these are on ebay 300783288817 will they fit a 2000 z3 2 litre or is any one selling a simalar set thanks for any help. i will get a set one day.!
Tez
Joined: Tue 03 Jul, 2012 09:55
Posts: 84

  blank

Re: wheels

Post by Tez »

Hi
Have a look at my post, you will see i have a brand new fully refurb set in 18"
if you want info give me a call on 07970.431528

rds
Tez
Tez
Joined: Tue 03 Jul, 2012 09:55
Posts: 84

  blank

Re: wheels

Post by Tez »

72.6mm centre bore for a Z3 :)
Post Reply