Gookah's Z3 2.8 Progress
Gookah's Z3 2.8 Progress
Here we go again. ..... Z3 Number 4
This ones my new toy, and to be honest I think all the forthcoming tinkering will be more fun than I got from the fully loaded Z4M I had, 'cos all I could do was polish it and get flashed by other motorists and camera's.
This one's a 2.8, and still has enough poke to get me out of shape on occasion...
The 'M' number plates will go, to be replaced with pressed ones, but they are all I have for now...
So, there's no sport spec, red leather standard seats with no heating... no aircon, and gingercaters all around. But a good base to start with 86,000 on the clock.
A hardtop was included, but the brackets are the homemade version off eBay.
They still work, even though the heated rear window didn't, No cable connections on this version.
Some of you may have seen the first purchase already,
M seats in blue and black, a blue dash, extended leather door cards and extended leather console also in blue leather.
This ones my new toy, and to be honest I think all the forthcoming tinkering will be more fun than I got from the fully loaded Z4M I had, 'cos all I could do was polish it and get flashed by other motorists and camera's.
This one's a 2.8, and still has enough poke to get me out of shape on occasion...
The 'M' number plates will go, to be replaced with pressed ones, but they are all I have for now...
So, there's no sport spec, red leather standard seats with no heating... no aircon, and gingercaters all around. But a good base to start with 86,000 on the clock.
A hardtop was included, but the brackets are the homemade version off eBay.
They still work, even though the heated rear window didn't, No cable connections on this version.
Some of you may have seen the first purchase already,
M seats in blue and black, a blue dash, extended leather door cards and extended leather console also in blue leather.
Last edited by gookah on Mon 04 Feb, 2013 12:05, edited 6 times in total.
Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)
I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Re: Z3 2.8 Progress Journal
Is it the twin or single vanos gookah?
The M seats were the best mod I did to my last 2.8
The M seats were the best mod I did to my last 2.8
///M Roadster - Evolve Stage 3
Re: Z3 2.8 Progress Journal
Looking good Pete, look forward to following what you do
Tim.
Tim.
Re: Z3 2.8 Progress Journal
All looks good especially with all the bits Santa has brought you this Christmas. Where do you get your pressed plates from?
Re: Z3 2.8 Progress Journal
Z3cade wrote:Is it the twin or single vanos gookah?
The M seats were the best mod I did to my last 2.8
Its an April 2000, so double Vanos M52TU engine, last of the 2.8's
Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)
I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Re: Z3 2.8 Progress Journal
('_')Z3 wrote:All looks good especially with all the bits Santa has brought you this Christmas. Where do you get your pressed plates from?
Last set of pressed plates I got from the show at Santa Pod,
however the next set are most likely an internet trawl...TBC
Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)
I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Re: Z3 2.8 Progress Journal
Thanks Tim,TitanTim wrote:Looking good Pete, look forward to following what you do
Tim.
I have plenty to do as well......
Santa was extremely generous...
Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)
I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Re: Z3 2.8 Progress Journal
Looks like that lot will keep you busy!!
The M52TU engine is great, and surprisingly economical!
Have you thought about the 330 inlet manifold conversion? It's quite easy DIY job and all you need is the manifold and adaptor bracket.. Bolt on job £150-200 for parts
But best to get it remapped to get best benefits from it if you do..
Look forward to your progress
The M52TU engine is great, and surprisingly economical!
Have you thought about the 330 inlet manifold conversion? It's quite easy DIY job and all you need is the manifold and adaptor bracket.. Bolt on job £150-200 for parts
But best to get it remapped to get best benefits from it if you do..
Look forward to your progress
///M Roadster - Evolve Stage 3
Re: Z3 2.8 Progress Journal
As if.........Z3cade wrote:Have you thought about the 330 inlet manifold conversion?
Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)
I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Re: Z3 2.8 Progress Journal
Z3cade wrote:Good man
Any plans for wheels?
yes, indeed
Last edited by gookah on Fri 27 Sep, 2013 13:54, edited 1 time in total.
Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)
I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Re: Z3 2.8 Progress Journal
First hurdle to overcome was the recurring engine light and the erratic idle when cold.
and the cause:
the common split elbow. so for less than a tenner I bought part no 13541435627. Please note it is a superseded part and you do not need the extra hose clip or joint that they advise if yours already has the two adjacent hose clips as shown.
Codes showing were P0170 and P0173 fuel banks 1 and 2.
Until I got the new elbow I kept resetting these to turn of the light.
Since changing the elbow they have not returned and the idle is smooth again.
and the dust in that engine bay....
and the cause:
the common split elbow. so for less than a tenner I bought part no 13541435627. Please note it is a superseded part and you do not need the extra hose clip or joint that they advise if yours already has the two adjacent hose clips as shown.
Codes showing were P0170 and P0173 fuel banks 1 and 2.
Until I got the new elbow I kept resetting these to turn of the light.
Since changing the elbow they have not returned and the idle is smooth again.
and the dust in that engine bay....
Last edited by gookah on Fri 28 Dec, 2012 01:19, edited 1 time in total.
Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)
I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Re: Z3 2.8 Progress Journal
So.... the dash was a tricky job to refit, as the 3 bolts under the windscreen (7mm socket size) screw into spring clips that slide about, and you cant move them with the dash in place if they are slightly out.
But other than that, just took a while to strip everything out.
What do you do with the original red console? The replacement one that I bought had the blue extended leather under the handbrake but was the pre-facelift....
Anyway, I got some blue carbon vinyl and wrapped my red console and swapped over the switch panels. I also wrapped the steering wheel trim.. but I'm not sure.
It may have to go black carbon.
The seats had different connections for the seatbelt pre-tensioners, so I had to solder the new connectors in place. Luckily I had the foresight to get both male and female halves from the breakers, All other connectors were identical, and I kept the airbag module.
All the other wiring was there for the heated seats and they plugged straight in. I had a couple of facelift heated seat switches given to me by my son G8JKA and the relay was already fitted.
Whilst the console was out I moved the roof switch wiring to the front as well..
Seats fitted, windows greased before fitting the new door cards, airbag light reset, (I had to move the car with the seats out..) and everything tested and working fine.
Lovely having heat on base and back again..... God those old seats were cold in a morning.
They need to have the scuffmaster treatment, but for now will suffice as the colour looks darker than Estoril, but thats is what the doorcards and console have written on them and I need to get the match correct.
Anyway here are a few pics of the new interior..
The head unit is next....
But other than that, just took a while to strip everything out.
What do you do with the original red console? The replacement one that I bought had the blue extended leather under the handbrake but was the pre-facelift....
Anyway, I got some blue carbon vinyl and wrapped my red console and swapped over the switch panels. I also wrapped the steering wheel trim.. but I'm not sure.
It may have to go black carbon.
The seats had different connections for the seatbelt pre-tensioners, so I had to solder the new connectors in place. Luckily I had the foresight to get both male and female halves from the breakers, All other connectors were identical, and I kept the airbag module.
All the other wiring was there for the heated seats and they plugged straight in. I had a couple of facelift heated seat switches given to me by my son G8JKA and the relay was already fitted.
Whilst the console was out I moved the roof switch wiring to the front as well..
Seats fitted, windows greased before fitting the new door cards, airbag light reset, (I had to move the car with the seats out..) and everything tested and working fine.
Lovely having heat on base and back again..... God those old seats were cold in a morning.
They need to have the scuffmaster treatment, but for now will suffice as the colour looks darker than Estoril, but thats is what the doorcards and console have written on them and I need to get the match correct.
Anyway here are a few pics of the new interior..
The head unit is next....
Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)
I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Re: Z3 2.8 Progress Journal
Hi ya Gookah,
Mate extremely interested in your updated console. I also have a 2k z3 but a coupe, mine has the older style console in it with the larger push button switches. I recently bought a 2001 console (like your new one) but was wondering if the connectors at the back of the switches will be plug and play or will I have to get he soldering iron out?
By the way, nice bunch of mods mate
Mate extremely interested in your updated console. I also have a 2k z3 but a coupe, mine has the older style console in it with the larger push button switches. I recently bought a 2001 console (like your new one) but was wondering if the connectors at the back of the switches will be plug and play or will I have to get he soldering iron out?
By the way, nice bunch of mods mate
Re: Z3 2.8 Progress Journal
Great read, this brings back fond memories of me doing something similar to the interior of my last car. It totally transforms the feel of the car
Santa was certainly good to you, be interested to hear some feedback on the springs you are going to fit. I see Eibach supply 2 different spring types, sport line and pro-kit. Not sure how much difference there is between the two types?
Look forward to the next update.
Santa was certainly good to you, be interested to hear some feedback on the springs you are going to fit. I see Eibach supply 2 different spring types, sport line and pro-kit. Not sure how much difference there is between the two types?
Look forward to the next update.
Re: Z3 2.8 Progress Journal
You will need the different switches also, as pre-facelift switches don't fit the facelift console (they are different widths,) but hopefully they are supplied in your new console, however the connectors are also different for the older/newer switches even though they do the same job, I believe your coupe may have the older style wiring loom and connectionsVanne wrote:Hi ya Gookah,
Mate extremely interested in your updated console. I also have a 2k z3 but a coupe, mine has the older style console in it with the larger push button switches. I recently bought a 2001 console (like your new one) but was wondering if the connectors at the back of the switches will be plug and play or will I have to get he soldering iron out?
By the way, nice bunch of mods mate
Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)
I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Re: Z3 2.8 Progress Journal
Brian H wrote:Great read, this brings back fond memories of me doing something similar to the interior of my last car. It totally transforms the feel of the car
Santa was certainly good to you, be interested to hear some feedback on the springs you are going to fit. I see Eibach supply 2 different spring types, sport line and pro-kit. Not sure how much difference there is between the two types?
Look forward to the next update.
The Sport Line (red springs), IF you can get hold of them, are lower, (as in 45-50mm drop) and firmer and recommended for track cars, The Pro-Kit lower 30mm all round and are more suited for a daily road going car.
I had the Pro-Kit on both my Z4's as well and they improved the looks and handling.
Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)
I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Re: Z3 2.8 Progress Journal
Please lose that ///M badgegookah wrote:
Have you fitted that stereo yet?
2000 BMW Z3 2.8 Titanium Silver Roadster with too many mods to list
Click For 2.0 Progress Journal
Click For 2.8 Progress Journal
Click For 2.0 Progress Journal
Click For 2.8 Progress Journal
Re: Z3 2.8 Progress Journal
Makes such a differents having the M seats in.. Your interior reminds me so much of my 2.8 miss it..
Keep up the good work
Keep up the good work
///M Roadster - Evolve Stage 3
Re: Z3 2.8 Progress Journal
The head unit and sub are now in, and working a treat, iPhone connected and wiring hidden, Bluetooth handsfree through the speakers with auto mute of the radio, even for directions in maps app.
Head unit controls the iPhone and charges it too.
You can even tailor the colour to the car, The display can be blue/white/green/red and every shade in between. I saw over 30 odd settings, and chose the orange closest to the standard.
Another feature is if the phone rings, the display colour is selectable and the default changes it to flashing blue..
It sounds great with the sub now..
a better pic of the interior, with the hardtop removed..:
and the stainless hoops installed,
These are the homemade hardtop brackets,
I got a facelift HRW switch, and plugged it in, but had to connect into the existing wiring behind the passenger seat. But that works now as well..
also put the seat tilt kit on the drivers (cheapo version)
That will do for today...
Head unit controls the iPhone and charges it too.
You can even tailor the colour to the car, The display can be blue/white/green/red and every shade in between. I saw over 30 odd settings, and chose the orange closest to the standard.
Another feature is if the phone rings, the display colour is selectable and the default changes it to flashing blue..
It sounds great with the sub now..
a better pic of the interior, with the hardtop removed..:
and the stainless hoops installed,
These are the homemade hardtop brackets,
I got a facelift HRW switch, and plugged it in, but had to connect into the existing wiring behind the passenger seat. But that works now as well..
also put the seat tilt kit on the drivers (cheapo version)
That will do for today...
Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)
I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Re: Z3 2.8 Progress Journal
Gookah – would you mind me asking whether there is a particular type of carbon fibre sheeting you would recommend for the internal dash trimming. I don't know much about it.
Re: Z3 2.8 Progress Journal
Just look on eBay for the 3M stuff, its all pretty similar
Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)
I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Re: Z3 2.8 Progress Journal
Bought some Scuffmaster in Estoril blue:
I also bought a leather repair kit, slid a 'repair patch' underneath the rip, applied the glue, then held it together for 2 mins and left it for an hour.
Cleaned the leather with the cleaner from the repair kit then applied the Scuffmaster by dabbing it on with a sponge.
This was the drivers side, and was after just one coat,
I will do another coat tomorrow, then onto the passenger side which is no where near as bad.
a view from afar:
Impressed is not an adequate enough word for how I feel....
Also had a small cigarette burn, and in the repair kit was some leather filler, so applied it and now I will touch up with a marker pen until I get some black Scuffmaster.
I also bought a leather repair kit, slid a 'repair patch' underneath the rip, applied the glue, then held it together for 2 mins and left it for an hour.
Cleaned the leather with the cleaner from the repair kit then applied the Scuffmaster by dabbing it on with a sponge.
This was the drivers side, and was after just one coat,
I will do another coat tomorrow, then onto the passenger side which is no where near as bad.
a view from afar:
Impressed is not an adequate enough word for how I feel....
Also had a small cigarette burn, and in the repair kit was some leather filler, so applied it and now I will touch up with a marker pen until I get some black Scuffmaster.
Last edited by gookah on Tue 04 Jun, 2013 15:30, edited 4 times in total.
Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)
I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Re: Z3 2.8 Progress Journal
Looking really good
My first standard red leather seats I used the German kit (can't quite remember the name ) and was impressed with that as well, but not cheap!
When I got the ///M seats I decided to get the drivers bolster done professionally which to be honest was the same cost as the German kit and looked even better, £60 I think!
It looks like you've got a great finish though for a first coat
My first standard red leather seats I used the German kit (can't quite remember the name ) and was impressed with that as well, but not cheap!
When I got the ///M seats I decided to get the drivers bolster done professionally which to be honest was the same cost as the German kit and looked even better, £60 I think!
It looks like you've got a great finish though for a first coat
Re: Z3 2.8 Progress Journal
Wow!!! The result on the seat is amazing!! Where did you get the scuff master and the repair kit???
There is a few places on the internet where we can found the scuff master but I'm not sure about the repair kit! Your seat looks very good so if I could do the same on my seat I would be more than pleased!!
There is a few places on the internet where we can found the scuff master but I'm not sure about the repair kit! Your seat looks very good so if I could do the same on my seat I would be more than pleased!!
Re: Z3 2.8 Progress Journal
This is the repair kit,:Pierrick wrote:Wow!!! The result on the seat is amazing!! Where did you get the scuff master and the repair kit???
There is a few places on the internet where we can found the scuff master but I'm not sure about the repair kit! Your seat looks very good so if I could do the same on my seat I would be more than pleased!!
http://www.ebay.co.uk/itm/130567872335? ... 1497.l2649
and Scuffmaster is available here :
http://www.liquidleather.com/scuffs.htm
Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)
I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Re: Gookah's Z3 2.8 Progress
Looking good Gookah.. Keep up the good work!
///M Roadster - Evolve Stage 3
Re: Gookah's Z3 2.8 Progress
Also tried to get rid of some of the sagginess in the leather with a hot air gun,
this was as much as I dared...
Passenger side now in progress....
this was as much as I dared...
Passenger side now in progress....
Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)
I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Re: Gookah's Z3 2.8 Progress
Ok thanks. There is a lot in this repair kit! Did you use everything?
I found a very cheap one, I guess you have the same in yours plus other bits...
http://www.ebay.co.uk/itm/Leather-Repai ... 4ab37b142a
And for the colour I found this:
http://www.ebay.co.uk/itm/Scuff-Master- ... 27ce888e24
Which i think is the same as yours but red... i'm just not sure if this the right red for me!
Or this one:
http://www.ebay.co.uk/itm/33-33-100ml-c ... 19d2e2656a
Which seems to be the right colour. (Q2TD Tanin red)
Thanks for your help, i might create a mew post at the right place to not pollute tis one!
I found a very cheap one, I guess you have the same in yours plus other bits...
http://www.ebay.co.uk/itm/Leather-Repai ... 4ab37b142a
And for the colour I found this:
http://www.ebay.co.uk/itm/Scuff-Master- ... 27ce888e24
Which i think is the same as yours but red... i'm just not sure if this the right red for me!
Or this one:
http://www.ebay.co.uk/itm/33-33-100ml-c ... 19d2e2656a
Which seems to be the right colour. (Q2TD Tanin red)
Thanks for your help, i might create a mew post at the right place to not pollute tis one!
Re: Gookah's Z3 2.8 Progress
Great job with the seats, they look to be coming up a real treat. Jobs like these are so satisfying when the results can easily be seen. I would not have thought of a heat gun to tighten the seats
Re: Gookah's Z3 2.8 Progress
Gookah,
Where did you get that iphone mount? Does is come with the usb cable attatched? Would you recommend that stereo for use with iPhones?
Where did you get that iphone mount? Does is come with the usb cable attatched? Would you recommend that stereo for use with iPhones?
Re: Gookah's Z3 2.8 Progress
EBay:Evs87 wrote:Gookah,
Where did you get that iphone mount? Does is come with the usb cable attatched? Would you recommend that stereo for use with iPhones?
http://www.ebay.co.uk/itm/Dexim-DCA166- ... 416eb939b7
It has a USB cable attached and this plugs into the back of the head unit to charge/ play music.
The head unit works equally well as a direct usb connection, or bluetooth streaming of the music.
On longer journeys I put the phone in the dock to also charge it, but on short ones I just use the streaming as it sees the phone when I start the car.
Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)
I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Re: Gookah's Z3 2.8 Progress
Decided to apply the Scuffmaster to the centre console carbon wrap, ~It matches better than the previous blue and gives it a matt finish.
Also fitted my new illuminated start button:
Pointless gadget I know, but simple things.....
Also fitted my new illuminated start button:
Pointless gadget I know, but simple things.....
Last edited by gookah on Sun 31 Mar, 2013 21:32, edited 1 time in total.
Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)
I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Re: Gookah's Z3 2.8 Progress
Also had a new roof fitted yesterday, and as the interior was now blue, I decided to copy G8JKA and get a blue one as well:
Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)
I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Re: Gookah's Z3 2.8 Progress
Looks fantastic pete Love the blue soft top on silver contrast.. Best colour combo on silver imo
///M Roadster - Evolve Stage 3
- Southernboy
- Joined: Thu 07 Oct, 2010 12:39
- Posts: 6437
- Location: Johannesburg
- Badman gee
- Joined: Sun 14 Nov, 2010 10:45
- Posts: 2299
Re: Gookah's Z3 2.8 Progress
Turn them to face each other it will look like a mirror
Re: Gookah's Z3 2.8 Progress
Looking good, also really like the colour combo.
Sent from my HTC Desire
Sent from my HTC Desire
Re: Gookah's Z3 2.8 Progress
can you please stop doing these things to your car . just when i think i have my car the way i like it . you come along every time with stuff that looks great and suits the car well
now i want more bits i cant afford ..
looks great mate , love the hood colour
now i want more bits i cant afford ..
looks great mate , love the hood colour
Re: Gookah's Z3 2.8 Progress
Just wait 'til I post the other stuff I still have to do......PCSAM wrote:can you please stop doing these things to your car
Sorry
Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)
I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Re: Gookah's Z3 2.8 Progress
Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)
I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Re: Gookah's Z3 2.8 Progress
Is that the storm handbrake handle. Looks good.
Sent from my GT-I8190 using Tapatalk 2
Sent from my GT-I8190 using Tapatalk 2
- Badman gee
- Joined: Sun 14 Nov, 2010 10:45
- Posts: 2299
Re: Gookah's Z3 2.8 Progress
Not storm motorwerks.Captain wrote:Is that the storm handbrake handle. Looks good.
Sent from my GT-I8190 using Tapatalk 2
Re: Gookah's Z3 2.8 Progress
Finalised the pager alarm with remote engine start:
Last edited by gookah on Sat 18 Feb, 2017 21:01, edited 1 time in total.
Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)
I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Re: Gookah's Z3 2.8 Progress
And a remote roof close, which will work from in the house, or up to 100 metres away,
OK it doesn't latch the handles, but if it starts chucking it down, I can remotely shut the roof, while I get my coat.
I just have to get in and clamp up, but now there is no sitting in the rain going through the motions getting soaked..
.....
And I just wanted to see if it could be done.
OK it doesn't latch the handles, but if it starts chucking it down, I can remotely shut the roof, while I get my coat.
I just have to get in and clamp up, but now there is no sitting in the rain going through the motions getting soaked..
.....
And I just wanted to see if it could be done.
Last edited by gookah on Sat 18 Feb, 2017 21:00, edited 2 times in total.
Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)
I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Re: Gookah's Z3 2.8 Progress
and lowered today with new Eibachs and front Boge struts.
and a new strut brace:
What a difference in driving....
Next week I might get the summer alloys out.....
and a new strut brace:
What a difference in driving....
Next week I might get the summer alloys out.....
Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)
I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Re: Gookah's Z3 2.8 Progress
and while were at it, I might as well show the induction kit with hose routed through to front bumper lower grille:
Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)
I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..