Gookah's Z3 2.8 Progress

Post pictures of your car and discuss it here. One car per thread, and keep it on-topic, please!
stupot50
Joined: Tue 07 Aug, 2012 08:35
Posts: 237

  Z3 roadster 2.8
Location: Torquay, Devon

Re: Gookah's Z3 2.8 Progress

Post by stupot50 »

Brace looks great, can I ask what make it is, where you got it from and for how much please?
1999 2.8 Arctic Silver Z3
1987 Black Renault Alpine GTA V6 Turbo
2007 325d Msport - remapped
User avatar
PCSAM
Joined: Sat 13 Aug, 2011 01:19
Posts: 1002

  blank
Location: Taynuilt

Re: Gookah's Z3 2.8 Progress

Post by PCSAM »

loving the work mate . tell me more about your induction kit ...... :D
Image
User avatar
Southernboy
Joined: Thu 07 Oct, 2010 12:39
Posts: 6436

  Z3 roadster 3.0i
Location: Johannesburg

Re: Gookah's Z3 2.8 Progress

Post by Southernboy »

I'm always amazed at the number of Z's with the PAS reservoir placed directly above the alternator....I suppose the idea was to ensure alternator failure at some point...Mine is situated below the alternator so any dripping / leaking fluid will only pollute the planet... :wink:
"Normal is overrated"
Image

Z3 Upgrades and Additions
gookah
Z Register member
Joined: Thu 07 Aug, 2008 09:51
Posts: 2737

  Z3 roadster 2.8

Re: Gookah's Z3 2.8 Progress

Post by gookah »

stupot50 wrote:Brace looks great, can I ask what make it is, where you got it from and for how much please?
One of these :
http://www.ebay.co.uk/itm/BMW-E36-or-Z3 ... 3cd0cb6a38
Image

Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)

I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
stupot50
Joined: Tue 07 Aug, 2012 08:35
Posts: 237

  Z3 roadster 2.8
Location: Torquay, Devon

Re: Gookah's Z3 2.8 Progress

Post by stupot50 »

Cheers for that, take it there was no fit up problems as it doesn't seem to be adjustable? Was it also cut out for the earth bolt?
1999 2.8 Arctic Silver Z3
1987 Black Renault Alpine GTA V6 Turbo
2007 325d Msport - remapped
gookah
Z Register member
Joined: Thu 07 Aug, 2008 09:51
Posts: 2737

  Z3 roadster 2.8

Re: Gookah's Z3 2.8 Progress

Post by gookah »

yes cut out, and straight on fit with no fouling
Image

Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)

I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
stupot50
Joined: Tue 07 Aug, 2012 08:35
Posts: 237

  Z3 roadster 2.8
Location: Torquay, Devon

Re: Gookah's Z3 2.8 Progress

Post by stupot50 »

Shame there is no "Buy it now" option :cry:
1999 2.8 Arctic Silver Z3
1987 Black Renault Alpine GTA V6 Turbo
2007 325d Msport - remapped
User avatar
Southernboy
Joined: Thu 07 Oct, 2010 12:39
Posts: 6436

  Z3 roadster 3.0i
Location: Johannesburg

Re: Gookah's Z3 2.8 Progress

Post by Southernboy »

I just seen them advertising one for £39.00...maybe it was on auction, but maybe not???
"Normal is overrated"
Image

Z3 Upgrades and Additions
stupot50
Joined: Tue 07 Aug, 2012 08:35
Posts: 237

  Z3 roadster 2.8
Location: Torquay, Devon

Re: Gookah's Z3 2.8 Progress

Post by stupot50 »

Southernboy wrote:I just seen them advertising one for £39.00...maybe it was on auction, but maybe not???
Had a look at that one, didn't like the look of it to be honest, maybe I'm just fussy :?
1999 2.8 Arctic Silver Z3
1987 Black Renault Alpine GTA V6 Turbo
2007 325d Msport - remapped
gookah
Z Register member
Joined: Thu 07 Aug, 2008 09:51
Posts: 2737

  Z3 roadster 2.8

Re: Gookah's Z3 2.8 Progress

Post by gookah »

Fitted my summer alloys today......

Image

Image

Image

Image

Image

.... :D
Image

Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)

I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Z3cade
Joined: Sat 09 Jan, 2010 18:18
Posts: 2634

  M roadster S50
Location: Peterborough

Re: Gookah's Z3 2.8 Progress

Post by Z3cade »

Looks niiiiice 8-)
///M Roadster - Evolve Stage 3
Image
Fozzfox72
Joined: Wed 10 Apr, 2013 09:40
Posts: 90

  Z3 roadster 2.8

Re: Gookah's Z3 2.8 Progress

Post by Fozzfox72 »

Hi Gookha
I am awaiting my first Z3 put deposit on one this Friday and pick up next week ( can't wait!) it's a Z3 2.8 t99.

After watching your progress and mods got to say I'm well impressed and amazed just what are out there!

So now you have my juices going what would you recommend as a beginners basic/essential mod. I kind of think maybe upgrading the stereo with iPod attachments it has original blaupunkt business cd player installed. All works but I like my music!! Sub woofer? Maybe ?

Look forward to your progress


Bests from SE LONDON


FF
barbancourt
Joined: Wed 30 Jan, 2013 09:45
Posts: 132

  Not specified

Re: Gookah's Z3 2.8 Progress

Post by barbancourt »

Nice Gookah!

Are those 18 inch?
ImageImageImage
gookah
Z Register member
Joined: Thu 07 Aug, 2008 09:51
Posts: 2737

  Z3 roadster 2.8

Re: Gookah's Z3 2.8 Progress

Post by gookah »

barbancourt wrote:Nice Gookah!

Are those 18 inch?
19's :D
Image

Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)

I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
gookah
Z Register member
Joined: Thu 07 Aug, 2008 09:51
Posts: 2737

  Z3 roadster 2.8

Re: Gookah's Z3 2.8 Progress

Post by gookah »

Thought I would spruce up the disc/hubs and calipers with a bit of colour..

Image

Image

Image
Image

Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)

I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
gookah
Z Register member
Joined: Thu 07 Aug, 2008 09:51
Posts: 2737

  Z3 roadster 2.8

Re: Gookah's Z3 2.8 Progress

Post by gookah »

And also coloured the rear bumper with satin black, .....just for a change.

Image

Image

Well it's different, ... and I like it...
Image

Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)

I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
User avatar
Captain
Joined: Thu 28 Jun, 2012 06:43
Posts: 520

  Z3 roadster 2.8
Location: Durban

Re: Gookah's Z3 2.8 Progress

Post by Captain »

Like the rear bumper

Sent from my GT-I8190 using Tapatalk 2
ImageImage
Pierrick
Joined: Fri 31 Aug, 2012 22:47
Posts: 484

  Z3 roadster 1.9

Re: Gookah's Z3 2.8 Progress

Post by Pierrick »

yeah! Rear bumper looks very good!!!
barbancourt
Joined: Wed 30 Jan, 2013 09:45
Posts: 132

  Not specified

Re: Gookah's Z3 2.8 Progress

Post by barbancourt »

I approve of these modifications.
ImageImageImage
Z3cade
Joined: Sat 09 Jan, 2010 18:18
Posts: 2634

  M roadster S50
Location: Peterborough

Re: Gookah's Z3 2.8 Progress

Post by Z3cade »

gookah wrote:Image

Well it's different, ... and I like it...

That looks awesome Pete.. 8-) such a transformation.. Love the black on the bumper, makes all the difference
///M Roadster - Evolve Stage 3
Image
gookah
Z Register member
Joined: Thu 07 Aug, 2008 09:51
Posts: 2737

  Z3 roadster 2.8

Re: Gookah's Z3 2.8 Progress

Post by gookah »

Thanks guys.
I think it looks a bit 'carbon diffuser' panel, as per the new fashionable BMW add on's......(yeah right!)... :D
Image

Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)

I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Del
Joined: Sat 19 Nov, 2011 18:35
Posts: 2136

  Z3 roadster 1.9

Re: Gookah's Z3 2.8 Progress

Post by Del »

gookah wrote:And also coloured the rear bumper with satin black, .....just for a change.
You're getting a good reaction - should have patented the idea and become an ebay millionaire. :D
gookah
Z Register member
Joined: Thu 07 Aug, 2008 09:51
Posts: 2737

  Z3 roadster 2.8

Re: Gookah's Z3 2.8 Progress

Post by gookah »

Del wrote:should have patented the idea and become an ebay millionaire. :D

This time next year, Del, this time next year ........ :thumb: :D
Image

Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)

I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
User avatar
g8jka
Z Register member
Joined: Sun 18 Apr, 2010 21:16
Posts: 1149

  Z3 roadster 2.8
Location: Telford

Re: Gookah's Z3 2.8 Progress

Post by g8jka »

Did you do it with the plastidip stuff? You know, the stuff that peels off just in case you don't like it :head: :roll:
2000 BMW Z3 2.8 Titanium Silver Roadster with too many mods to list :-D :drive
Image
Click For 2.0 Progress Journal
Click For 2.8 Progress Journal
bertiejaffa
Joined: Fri 26 Jul, 2013 09:28
Posts: 1733

  M roadster S50
Location: Manchester

Re: Gookah's Z3 2.8 Progress

Post by bertiejaffa »

Looks very good and given me loads of ideas.... where did you get the brace strut from and do they really make a big difference?
Here come the girls.....
Image
My //M Refurb
My First Zed Journal
markhinton
Joined: Tue 11 Jun, 2013 16:01
Posts: 75

  Z3 roadster 2.8

Re: Gookah's Z3 2.8 Progress

Post by markhinton »

Looks awesome! Have you lamin x'd your rear indicator lights? Do they still flash orange?
Image
gookah
Z Register member
Joined: Thu 07 Aug, 2008 09:51
Posts: 2737

  Z3 roadster 2.8

Re: Gookah's Z3 2.8 Progress

Post by gookah »

markhinton wrote:Looks awesome! Have you lamin x'd your rear indicator lights? Do they still flash orange?
They flash more red (with an orange tinge).... but I will risk it for now. I just used lens repair tape from the local pound shop!
Easy pull off if required....
Image

Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)

I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
gookah
Z Register member
Joined: Thu 07 Aug, 2008 09:51
Posts: 2737

  Z3 roadster 2.8

Re: Gookah's Z3 2.8 Progress

Post by gookah »

bertiejaffa wrote:Looks very good and given me loads of ideas.... where did you get the brace strut from and do they really make a big difference?
Read higher up the page....
They do make a difference in a more rigid feel,
You can't tell that much when you fit it, but you can when you take it back off, I don't know how that works :D
Image

Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)

I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
gookah
Z Register member
Joined: Thu 07 Aug, 2008 09:51
Posts: 2737

  Z3 roadster 2.8

Re: Gookah's Z3 2.8 Progress

Post by gookah »

Fitted my new matching Estoril blue tonneau for Santa Pod,


Image

Image

These are so rare..... :wink:
Image

Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)

I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
gookah
Z Register member
Joined: Thu 07 Aug, 2008 09:51
Posts: 2737

  Z3 roadster 2.8

Re: Gookah's Z3 2.8 Progress

Post by gookah »

Cruise control fitted yesterday,
Mine is the 2.8 M52tu engine, and all I needed was the control stalk and the interface.
20 minutes tops, and most of that was carefully cutting out the pre-marked hole for the stalk..
Worked straight away ....and total cost .....£83 ......£47 for the interface from BMW, and the stalk was an eBay purchase..
Only downside I can see is there is no indicator light to tell you it is in operation.
Now those average speed cameras won't be getting me..... :D
Image

Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)

I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
User avatar
Brian H
Joined: Tue 16 Dec, 2008 19:55
Posts: 2505

  Z3 roadster 3.0i

Re: Gookah's Z3 2.8 Progress

Post by Brian H »

Well you learn something new everyday, I did not know that estoril tonneau covers existed, suits the car.

Edit: just a thought but have you been busy with the dye again?
gookah
Z Register member
Joined: Thu 07 Aug, 2008 09:51
Posts: 2737

  Z3 roadster 2.8

Re: Gookah's Z3 2.8 Progress

Post by gookah »

Brian H wrote:Well you learn something new everyday, I did not know that estoril tonneau covers existed, suits the car.

Edit: just a thought but have you been busy with the dye again?

I spilled a bit..... :D
Image

Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)

I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Bi11
Joined: Mon 05 Nov, 2012 21:26
Posts: 150

  M roadster S54
Location: Bedford

Re: Gookah's Z3 2.8 Progress

Post by Bi11 »

Can I ask how you dyed the tonneau cover and what you used? Looks a very professional job. Tempted to have a go at a red one if it is not too difficult.
Image
gookah
Z Register member
Joined: Thu 07 Aug, 2008 09:51
Posts: 2737

  Z3 roadster 2.8

Re: Gookah's Z3 2.8 Progress

Post by gookah »

The same as I used on the seats, Scuffmaster,
about 7 thin coats, which is not as much product as it seems, covered the black tonneau completely, and it still folds without any signs of cracking etc.
Image

Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)

I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Bi11
Joined: Mon 05 Nov, 2012 21:26
Posts: 150

  M roadster S54
Location: Bedford

Re: Gookah's Z3 2.8 Progress

Post by Bi11 »

Thanks :thumb:
Image
gookah
Z Register member
Joined: Thu 07 Aug, 2008 09:51
Posts: 2737

  Z3 roadster 2.8

Re: Gookah's Z3 2.8 Progress

Post by gookah »

cheapo hardtop manual hoist now added to my garage:

Image



Can fit and remove hardtop on my own now.
Total cost less than £30, including all the slings (and carabiners from Aldi)
Last edited by gookah on Sat 18 Feb, 2017 21:04, edited 2 times in total.
Image

Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)

I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Stormy_be
Joined: Thu 19 Dec, 2013 06:43
Posts: 58

  Z3 roadster 2.8

Re: Gookah's Z3 2.8 Progress

Post by Stormy_be »

gookah wrote:and while were at it, I might as well show the induction kit with hose routed through to front bumper lower grille:

Image
What's that type of air intake?
I always had K&N's but they don't have a straight air intake.

Thanks, Koen
Wolverine_1999
Joined: Mon 15 Feb, 2010 20:07
Posts: 454

  Z3 roadster 2.0
Location: Munich

Re: Gookah's Z3 2.8 Progress

Post by Wolverine_1999 »

Im seriously considering painting that bit on the bumper black as well, as I have to respray my bumper anyway.. However, I will go for a matt black finish, as I think all those splitters have this finish.

Could you post a picture directly from behind the car? That would be great! :)
gookah
Z Register member
Joined: Thu 07 Aug, 2008 09:51
Posts: 2737

  Z3 roadster 2.8

Re: Gookah's Z3 2.8 Progress

Post by gookah »

Wolverine_1999 wrote:Im seriously considering painting that bit on the bumper black as well, as I have to respray my bumper anyway.. However, I will go for a matt black finish, as I think all those splitters have this finish.

Could you post a picture directly from behind the car? That would be great! :)

Image
Last edited by gookah on Sat 18 Feb, 2017 21:08, edited 1 time in total.
Image

Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)

I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Wolverine_1999
Joined: Mon 15 Feb, 2010 20:07
Posts: 454

  Z3 roadster 2.0
Location: Munich

Re: Gookah's Z3 2.8 Progress

Post by Wolverine_1999 »

gookah wrote:
Wolverine_1999 wrote:Im seriously considering painting that bit on the bumper black as well, as I have to respray my bumper anyway.. However, I will go for a matt black finish, as I think all those splitters have this finish.

Could you post a picture directly from behind the car? That would be great! :)

Excellent, thanks! Now to think it over..
gookah
Z Register member
Joined: Thu 07 Aug, 2008 09:51
Posts: 2737

  Z3 roadster 2.8

Re: Gookah's Z3 2.8 Progress

Post by gookah »

Another Xmas pressie,:
Royal Steering Wheels, extra padding, perforated/smooth leather and blue stitching.

Image

It makes a big difference, It's like holding my Z4M steering wheel. :D
Image

Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)

I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Valle_fora
Joined: Fri 08 Jun, 2012 18:31
Posts: 16

  BMW other
Location: Sweden

Re: Gookah's Z3 2.8 Progress

Post by Valle_fora »

It looks great! Thanks for your inspirational progress threads. Following yours and your son's threads with great interest.
Looking for (and dreaming of) a Z3 :-)
gookah
Z Register member
Joined: Thu 07 Aug, 2008 09:51
Posts: 2737

  Z3 roadster 2.8

Re: Gookah's Z3 2.8 Progress

Post by gookah »

No update for a while so I will share some.

Fitted Halfords mudflaps:

with a bit of modification by cutting the lower section off:

Image

Image

and attaching the 4 fixing clips:

Image

They now look like this:

Image

Image

Also removed the front number plate carrier:
Image

more pic's to follow soon:

:D
Last edited by gookah on Sat 18 Feb, 2017 21:14, edited 2 times in total.
Image

Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)

I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
gookah
Z Register member
Joined: Thu 07 Aug, 2008 09:51
Posts: 2737

  Z3 roadster 2.8

Re: Gookah's Z3 2.8 Progress

Post by gookah »

Though I'd better do some updates:


Bought some AC Schnitzers for winter tyre use:
Image

had them stripped. and powder coated in Gunmetal for a different look:

Image

Then some distance shots:

Image

Image


Image

Image



But then to break up the dark I added some highlights:

Image
Last edited by gookah on Sat 18 Feb, 2017 21:24, edited 2 times in total.
Image

Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)

I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
gookah
Z Register member
Joined: Thu 07 Aug, 2008 09:51
Posts: 2737

  Z3 roadster 2.8

Re: Gookah's Z3 2.8 Progress

Post by gookah »

So I decided on a suspension refresh and went with the Strongflex bushes which are the same hardness as, but a lot cheaper than, Powerflex bushes: Fronts only at this moment:

Image

also some new coilovers, with Meyle front and rear top mounts, Lemforder wishbones, and drop links.

Image

and whilst under there with my new Jack thingy:

Image


Image

Image

...... I also took off the wheel arch liners, and coated with a nice shiny Hamerite paint.. :D

Image

Image

Image
Last edited by gookah on Sat 18 Feb, 2017 21:29, edited 2 times in total.
Image

Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)

I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
gookah
Z Register member
Joined: Thu 07 Aug, 2008 09:51
Posts: 2737

  Z3 roadster 2.8

Re: Gookah's Z3 2.8 Progress

Post by gookah »

Then eventually got around to fitting these:

Image

Image

after having them sprayed along with the front bumper (stonechip city)

and using a different take on the M gills as follows using plastidip:

Image

The bumper had mesh fitted and now looks like this:

Image

From a distance with summer wheels back on:

Image

and some close ups:

Image

Image

Image

Image



Now I have this to fit when I can find time:

Image
Image

Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)

I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Joycey
Joined: Mon 11 Jul, 2011 22:15
Posts: 290

  M roadster S52
Location: Basingstoke

Re: Gookah's Z3 2.8 Progress

Post by Joycey »

I love the attention to detail you pay your zed. Top work Gook.

Lee
User avatar
Southernboy
Joined: Thu 07 Oct, 2010 12:39
Posts: 6436

  Z3 roadster 3.0i
Location: Johannesburg

Re: Gookah's Z3 2.8 Progress

Post by Southernboy »

Impeccable commitment to excellence. :cheers
"Normal is overrated"
Image

Z3 Upgrades and Additions
User avatar
Badman gee
Joined: Sun 14 Nov, 2010 10:45
Posts: 2299

  M roadster S50

Re: Gookah's Z3 2.8 Progress

Post by Badman gee »

It's a great looking car.

Well done sir
Image

The 'BEAST' 666
gookah
Z Register member
Joined: Thu 07 Aug, 2008 09:51
Posts: 2737

  Z3 roadster 2.8

Re: Gookah's Z3 2.8 Progress

Post by gookah »

thank you all.... :D
Image

Z3 2.8 Progress Journal (Mine)
Z3 1.9 Sport Progress Journal (Wifey's)

I have an element of 'M-styling' on my car, If that's a good enough reason for the manufacturers to adorn a 320 with the M badge, then its certainly a good enough reason for me..
Post Reply