LOW REV HESITATION

westworld · Post by **westworld** » Sun 15 Mar, 2015 22:28

my 3.0 auto at 1500 - 2000 rpm and accelerate nothing happens its like pulling a truck then kicks down 2 gears and all is ok , any ideas welcome, ive heard coils or spark plugs or cam sensor ???

Del · Post by **Del** » Sun 15 Mar, 2015 23:02

A coil problem would tend to give a permanent misfire and a failed sensor would normally cause a warning light on the instrument cluster. Unless you know the service history, I would start with simple service items like plugs & air filter - both these items get left in for ages these days and if a sequential main dealer service regime was disrupted, these items can often get overlooked and left in far too long.

Gordon13 · Post by **Gordon13** » Mon 16 Mar, 2015 07:16

Cam sensor is entierly possible. Failure only

logs a ' silent' fault code so no warning lights.

Get the codes read at a garage or some one that has carsoft or inpa.

There may be a member near you who can help, whereabouts are you??

westworld · Post by **westworld** » Mon 16 Mar, 2015 20:14

thanx for help & advice ,based in Lincolnshire

Gordon13 · Post by **Gordon13** » Mon 16 Mar, 2015 20:22

Ah im in devon so cant do it for you.

try putting up a post asking if a member near you can run a diag.

zroadster.net

LOW REV HESITATION

LOW REV HESITATION

Re: LOW REV HESITATION

Re: LOW REV HESITATION

Re: LOW REV HESITATION

Re: LOW REV HESITATION