Breaking Pre facelift 2.8 Z3 Roadster most parts available

Whether you are having a garage clear-out, looking for a second-hand accessory, or buying/selling a Z, post your 'for sale' and 'wanted' ads here.
This Forum is not meant for discussion, please do not comment on the asking price.
Orinoco
Joined: Sat 07 Jul, 2007 20:49
Posts: 632

  Z3 roadster 2.8

Breaking Pre facelift 2.8 Z3 Roadster most parts available

Post by Orinoco »

Hi
I will soon be breaking a pre facelift 2.8 Z3 roadster.

Parts that are NOT available are:
Bumper side light lenses
Drivers door/door card/wing mirror
Drivers seat
Tailgate although the central locking, internals ARE available
Side repeators
Original owners handbook
Aerial base
Recently re-trimmed leather M steering wheel
AC Schnitzer rear bumper spoiler
Aerial grommet
Fuse box lid
ABS pump
Rear lights
Headlight pull switch
Dash centre air vent
Boot carpets
Tools and jack
Screen washer tubing
Passenger storage net and fixings
Interior 'roadster' sill trims
Interior passenger compartment light
Under bonnet soundproofing
Rear tailgate 3rd brake light unit
Bonnet front kidney grills
set of type 42 BBS split rims

I will NOT be removing the engine and gearbox as I don't have the space but will remove ancillary parts.

The car has some decent bits which include:
M side gills although one of the chrome pieces is missing
Recently re-trimmed leather M steering wheel SOLD
Clear lenses original headlights SOLD
AC Schnitzer rear bumper spoiler SOLD
Hardtop fitting kit
Original roll bars

I will be starting to remove and list parts separately with pictures over the next week.

If there is any part you need no matter how small please let me know. Parts will be posted on Mondays to allow time for removal at weekends but I may agree other days for postage with buyers.

I will update the list of parts which are NOT available for reference too.

Regards
James
Last edited by Orinoco on Fri 20 Mar, 2015 08:50, edited 19 times in total.
Bonzo
Joined: Wed 21 Mar, 2012 21:52
Posts: 866

  Z3 roadster 2.8
Location: Norfolk

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Bonzo »

Clear front side lights, spoiler AND STEERING WHEEL what is body colour?

Bonzo
Z3lda (Zelda), 1998 2.8, Montreal Blue, Beige Oregon leather interior and M steering wheel, Sports Seats, Wood trim, Chrome Line Interior, Centre armrest with Cupholder, Alpina Softline wheels, Chromed Angel Eyes, De- tango'd, Rear stone guards, Sport aerial, ASC front strut brace, Strong Strut Butt Strut and Body Brace, Uprated brake fluid, Yellowstuff pads 78k.
Orinoco
Joined: Sat 07 Jul, 2007 20:49
Posts: 632

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Orinoco »

Hi Bonzo
As per listing sidelights are not available.

I will be able to provide pics of steering wheel and AC Schnitzer rear spoiler on Monday.

Body colour is Orinoco green.

Regards
James
Bonzo
Joined: Wed 21 Mar, 2012 21:52
Posts: 866

  Z3 roadster 2.8
Location: Norfolk

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Bonzo »

Hi James, yeah sorry about the brain fade re. the bumper side lights :oops: Are the top plastic engine covers in good nick? Mine are a little worse for wear.
Cheers,
Bonzo.
Z3lda (Zelda), 1998 2.8, Montreal Blue, Beige Oregon leather interior and M steering wheel, Sports Seats, Wood trim, Chrome Line Interior, Centre armrest with Cupholder, Alpina Softline wheels, Chromed Angel Eyes, De- tango'd, Rear stone guards, Sport aerial, ASC front strut brace, Strong Strut Butt Strut and Body Brace, Uprated brake fluid, Yellowstuff pads 78k.
chill4x4saph
Joined: Sun 26 Jan, 2014 09:56
Posts: 146

  M roadster S54

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by chill4x4saph »

which side m grill/gill is complete?
User avatar
sirius-c
Joined: Wed 12 Dec, 2012 22:24
Posts: 499

  Z3 roadster 2.8
Location: Eeh ba gum lad, 'ow do?

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by sirius-c »

Hi James, any photos of the steering wheel yet
Designed or not designed, that is the question.
Orinoco
Joined: Sat 07 Jul, 2007 20:49
Posts: 632

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Orinoco »

chill4x4saph wrote:which side m grill/gill is complete?
Hi
The complete one is the passenger side one.

Regards
James
Orinoco
Joined: Sat 07 Jul, 2007 20:49
Posts: 632

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Orinoco »

Bonzo wrote:Hi James, yeah sorry about the brain fade re. the bumper side lights :oops: Are the top plastic engine covers in good nick? Mine are a little worse for wear.
Cheers,
Bonzo.
Hi
The plastic engine covers are in good condition and I'll take some pics tomorrow.

Regards
James
Orinoco
Joined: Sat 07 Jul, 2007 20:49
Posts: 632

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Orinoco »

Hi
I'm having problems with my photobucket account uploading the pictures.

I'll get pics of parts to everyone who requested as soon as possible and worse case tomorrow if I have to use a relatives account.

Apologies for the delay.

Regards
James
User avatar
Beardy Simon
Joined: Sun 21 Dec, 2014 17:17
Posts: 5

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Beardy Simon »

Hi,
Looking for a gear knob!
Hope you can help!
Image
Orinoco
Joined: Sat 07 Jul, 2007 20:49
Posts: 632

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Orinoco »

Hi
As per listing the bumper lights are not available.

The gear knob has seen better days to be honest. Chrome has come away, it could be painted though.

I'll take a pic tomorrow and let you see.

Regards
James
User avatar
Beardy Simon
Joined: Sun 21 Dec, 2014 17:17
Posts: 5

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Beardy Simon »

Hi James,
Don't worry. Seems your knob is in the same state as mine!

Thanks for the reply.
Image
Orinoco
Joined: Sat 07 Jul, 2007 20:49
Posts: 632

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Orinoco »

Beardy Simon wrote:Hi James,
Don't worry. Seems your knob is in the same state as mine!

Thanks for the reply.
Pardon.... :)

No problem.
Cooper01
Joined: Tue 29 Apr, 2014 08:06
Posts: 163

  Z3 roadster 3.0i

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Cooper01 »

I am after the zigzag style radiator return tube which is black an 8mm diameter - if the 2.8 has the same as my 2.2 VIN LL73078.
I am also after the passenger [left] side part of the dash including the airbag cover and air vent on the left side of the dash. I assume the dash is black and the leather is smooth not stitched.

are these available and are you willing to post to australia?
Need pix of what I need? Just PM me. Ta

Cooper
Orinoco
Joined: Sat 07 Jul, 2007 20:49
Posts: 632

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Orinoco »

Cooper01 wrote:I am after the zigzag style radiator return tube which is black an 8mm diameter - if the 2.8 has the same as my 2.2 VIN LL73078.
I am also after the passenger [left] side part of the dash including the airbag cover and air vent on the left side of the dash. I assume the dash is black and the leather is smooth not stitched.

are these available and are you willing to post to australia?
Need pix of what I need? Just PM me. Ta

Cooper
Hi Cooper
The dash is beige and car did not have a passenger side airbag fitted just a cover.

Air vent is available and I would post to Australia would envisage the postage being high. Do you want me to enquire?

Can you provide the part number or diagram off RealOEM to show me the pipe you need?

Let me know.

Regards
James
Cooper01
Joined: Tue 29 Apr, 2014 08:06
Posts: 163

  Z3 roadster 3.0i

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Cooper01 »

HI James, thanks anyway as I would have the other parts bundled with the dash to keep the costs down. :(
I will keep looking about.
Cooper
sviru
Joined: Wed 06 Apr, 2011 21:32
Posts: 100

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by sviru »

PM sent
Image
Orinoco
Joined: Sat 07 Jul, 2007 20:49
Posts: 632

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Orinoco »

sirius-c wrote:Hi James, any photos of the steering wheel yet
PM with pics sent.

regards
James
Orinoco
Joined: Sat 07 Jul, 2007 20:49
Posts: 632

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Orinoco »

Had numerous enquiries about this and sent interested parties pics earlier but the Recently re-trimmed leather M steering wheel is NOW SOLD
Joycey
Joined: Mon 11 Jul, 2011 22:15
Posts: 290

  M roadster S52
Location: Basingstoke

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Joycey »

Morning do you still have the hard top fitting kit?

Lee
Keynun
Joined: Wed 15 Aug, 2012 17:02
Posts: 47

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Keynun »

Have you got the aircon auxiliary fan? It's the electric one just behind the bumper but infront of the rad/condenser. If so, could you PM me the details?
Orinoco
Joined: Sat 07 Jul, 2007 20:49
Posts: 632

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Orinoco »

Hi
Just to confirm all parts which have been SOLD will be collected by the courier on Monday.

I will PM each person the tracking info in due course.

Regards
James
Fender2004
Joined: Fri 14 Aug, 2009 10:24
Posts: 907

  Z3 roadster 2.8
Location: Houghton-Le-Spring

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Fender2004 »

What is the fuse box cover like, mine is a bit discoloured.
Any chance of a photo?
Image
Orinoco
Joined: Sat 07 Jul, 2007 20:49
Posts: 632

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Orinoco »

Fender2004 wrote:What is the fuse box cover like, mine is a bit discoloured.
Any chance of a photo?
Hi
The fuse box cover is in very good condition from memory.

I'll take a picture tomorrow in daylight and will send it to you by PM.

Regards
James
User avatar
Beardy Simon
Joined: Sun 21 Dec, 2014 17:17
Posts: 5

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Beardy Simon »

Is your on board computer working and if so, is it the square one and available?
Many thanks.
Image
Orinoco
Joined: Sat 07 Jul, 2007 20:49
Posts: 632

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Orinoco »

Beardy Simon wrote:Is your on board computer working and if so, is it the square one and available?
Many thanks.
Hi
Yes the trip computer is fully functional and still available and is the square type (my car is a pre facelift).

PM sent

Regards
James
zibomb
Joined: Sat 09 Jul, 2011 11:14
Posts: 78

  Z3 roadster 2.8
Location: Oxford
Contact:

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by zibomb »

Do you have the front bumper? If so what condition is it?
Drop_Gear
Joined: Fri 03 Aug, 2012 21:16
Posts: 10

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Drop_Gear »

How much for the drivers side marker light lens delivered to london? Cheers
Orinoco
Joined: Sat 07 Jul, 2007 20:49
Posts: 632

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Orinoco »

Drop_Gear wrote:How much for the drivers side marker light lens delivered to london? Cheers
Hi
As per listing they are NOT available.

Regards
James
forest1
Joined: Thu 05 Sep, 2013 22:10
Posts: 29

  blank

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by forest1 »

Hi have you got any of the small dash blanks (rectangle plastic things) ?
Orinoco
Joined: Sat 07 Jul, 2007 20:49
Posts: 632

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Orinoco »

forest1 wrote:Hi have you got any of the small dash blanks (rectangle plastic things) ?
Hi
Do you mean the switch blanks like these?:

Image

Image

If so I have one available as per the size shown in the pics.

Please PM me if this is what you mean.

Regards
James
seasick steve
Joined: Sun 31 Mar, 2013 18:11
Posts: 8

  Z3 roadster 2.8
Location: Poole, Dorset

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by seasick steve »

Hi there,
I'm after the under engine tray (51718397359), and its associated hangers. There not to hard to get off - Bambi took mine off ever so easily so Im sure a human could do that!
Let me know what you want, and where you are because I might be able to arrange collection.
Thanks.
Steve
Orinoco
Joined: Sat 07 Jul, 2007 20:49
Posts: 632

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Orinoco »

seasick steve wrote:Hi there,
I'm after the under engine tray (51718397359), and its associated hangers. There not to hard to get off - Bambi took mine off ever so easily so Im sure a human could do that!
Let me know what you want, and where you are because I might be able to arrange collection.
Thanks.
Steve
Hi Steve
I recently sold the brand new one I had.

I may have a used one in the garage but will not be able to check until tomorrow afternoon.

I'll PM you with details.

Regards
James
User avatar
sirius-c
Joined: Wed 12 Dec, 2012 22:24
Posts: 499

  Z3 roadster 2.8
Location: Eeh ba gum lad, 'ow do?

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by sirius-c »

Did you sell the obc? And are both plastic inserts/cap thingy-mi-bobs available that are next to each front fog?
Designed or not designed, that is the question.
seasick steve
Joined: Sun 31 Mar, 2013 18:11
Posts: 8

  Z3 roadster 2.8
Location: Poole, Dorset

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by seasick steve »

Thanks James, look forward to hearing from you.
Steve
Orinoco
Joined: Sat 07 Jul, 2007 20:49
Posts: 632

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Orinoco »

sirius-c wrote:Did you sell the obc? And are both plastic inserts/cap thingy-mi-bobs available that are next to each front fog?
Hi
I still have the OBC, another person said they wanted it and as often happens they are never heard from again.

I have one of the plastic inserts from next to the fog light (not sure which one so will let you know tomorrow). Whichever one it is it was virtually brand new as it was only fitted to the car for a month or so.

I'll drop you a PM tomorrow.

Regards
James
Orinoco
Joined: Sat 07 Jul, 2007 20:49
Posts: 632

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Orinoco »

seasick steve wrote:Thanks James, look forward to hearing from you.
Steve
Hi Steve
I have the used one but it has a piece missing on one corner. I'd take £13 for it delivered with tracked postage.

Are you still interested? If so I can take a pic of it tomorrow.

Let me know.

Regards
James
Keynun
Joined: Wed 15 Aug, 2012 17:02
Posts: 47

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Keynun »

Hi

i need a bonnet (with all the hinges etc excluding the side grills/front grills) and front headlights.

Would you be able to quote these delivered to london? If you can't deliver the bonnet, I would still be interested in the front headlights.
Orinoco
Joined: Sat 07 Jul, 2007 20:49
Posts: 632

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Orinoco »

Keynun wrote:Hi

i need a bonnet (with all the hinges etc excluding the side grills/front grills) and front headlights.

Would you be able to quote these delivered to london? If you can't deliver the bonnet, I would still be interested in the front headlights.
Hi
I'll send you a PM with details.

Regards
James
User avatar
BladeRunner919
Joined: Fri 17 Feb, 2012 20:18
Posts: 2225

  Z3 roadster 1.9

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by BladeRunner919 »

Do you have the external temp sensor for the obc?
Hans
Joined: Wed 04 Feb, 2015 17:24
Posts: 4

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Hans »

Hi James,

PM with a list of parts sent.

Thanks, Hans
Z3 Mark
Joined: Wed 20 Nov, 2013 22:34
Posts: 101

  Z3 roadster 1.9

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Z3 Mark »

Do you have the passenger side sill? (bit below the door) If so what's the condition like and how much posted? :)
Image
seasick steve
Joined: Sun 31 Mar, 2013 18:11
Posts: 8

  Z3 roadster 2.8
Location: Poole, Dorset

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by seasick steve »

Hi,

Sorry for the gap in getting back to you, and yes please regarding the photos - it could be what I need.

If there are any of the attachment bits for it I would be grateful too - for extra cost obviously.

Thanks

Steve
Orinoco
Joined: Sat 07 Jul, 2007 20:49
Posts: 632

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Orinoco »

seasick steve wrote:Hi,

Sorry for the gap in getting back to you, and yes please regarding the photos - it could be what I need.

If there are any of the attachment bits for it I would be grateful too - for extra cost obviously.

Thanks

Steve
Hi Steve
I'll PM pics tomorrow afternoon. So please check your private messages.

Regards
James
Orinoco
Joined: Sat 07 Jul, 2007 20:49
Posts: 632

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Orinoco »

Bump
Dan21
Joined: Sun 08 Feb, 2015 08:02
Posts: 12

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Dan21 »

Hi, do you have the front bonnet grills (kidney grills) available? If so could you send me some pics and prices of them and also of the headlights?
Cheers!
Orinoco
Joined: Sat 07 Jul, 2007 20:49
Posts: 632

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Orinoco »

Dan21 wrote:Hi, do you have the front bonnet grills (kidney grills) available? If so could you send me some pics and prices of them and also of the headlights?
Cheers!
Hi Dan
I have both and I have listed them separately with pics and bumped them to the top of the forum. PM also sent.
Regards
James
User avatar
BladeRunner919
Joined: Fri 17 Feb, 2012 20:18
Posts: 2225

  Z3 roadster 1.9

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by BladeRunner919 »

BladeRunner919 wrote:Do you have the external temp sensor for the obc?
Bump of my question!
Orinoco
Joined: Sat 07 Jul, 2007 20:49
Posts: 632

  Z3 roadster 2.8

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by Orinoco »

BladeRunner919 wrote:
BladeRunner919 wrote:Do you have the external temp sensor for the obc?
Bump of my question!
PM sent

If people can PM me any questions.

Thanks
James
z3birds
Joined: Fri 11 Jul, 2014 05:22
Posts: 12

  Z3 roadster 1.9

Re: Breaking Pre facelift 2.8 Z3 Roadster most parts availab

Post by z3birds »

Hi

Do you still have the "roadster" sill protectors, both drivers side and passenger side. If so are they black or chrome finish and how much are they priced at including postage.

Thanks
Image
Post Reply