Just a quick bump. One of the wires has broken off the tilt sensor wiring block
Can you buy replacements? Or get new female pin connectors to solder on?
Sent from my iPhone using Tapatalk Pro
Tilt sensor
Re: Tilt sensor
Doubt you will get a pin it will only come as a unit from BMW
One on ebay at the moment http://www.ebay.co.uk/itm/BMW-Z3-E36-Al ... SwstxVUKxX
or
Ask spurs fan on here if he has one from his stock of parts.
One on ebay at the moment http://www.ebay.co.uk/itm/BMW-Z3-E36-Al ... SwstxVUKxX
or
Ask spurs fan on here if he has one from his stock of parts.
Colb
1999 BMW 1.8 Z3
2003 BMW 2.5 Z4
1998 Honda Deauville NT650V
1999 BMW 1.8 Z3
2003 BMW 2.5 Z4
1998 Honda Deauville NT650V
- BladeRunner919
- Joined: Fri 17 Feb, 2012 20:18
- Posts: 2225
Re: Tilt sensor
Actually, all the connectors and pins are available from BMW - you just have to search out the part numbers on Realoem, in the 'Vehicle Electrical System' section, which can be 'challenging'!
Re: Tilt sensor
http://www.realoem.com/bmw/enUS/showpar ... Id=65_1011
Is it the pin in the cable connection plug that needs replacing as opposed to the socket pin in the tilt sensor?
Have a look here for repair kits for supplementary wiring bits
http://www.realoem.com/bmw/enUS/partgrp ... 3_19&mg=61
Is it the pin in the cable connection plug that needs replacing as opposed to the socket pin in the tilt sensor?
Have a look here for repair kits for supplementary wiring bits
http://www.realoem.com/bmw/enUS/partgrp ... 3_19&mg=61
Colb
1999 BMW 1.8 Z3
2003 BMW 2.5 Z4
1998 Honda Deauville NT650V
1999 BMW 1.8 Z3
2003 BMW 2.5 Z4
1998 Honda Deauville NT650V
- dazthephot
- Joined: Wed 09 Apr, 2008 18:58
- Posts: 266
- Contact:
Re: Tilt sensor
It's the wire that goes into the black block connector that's broken and corroded so i thought i could get a replacement female micro pin and dig out the corroded one in the block, then solder the new female pin on to the wire and insert it back into the block.
I suspect some of the other wires are corroded too so i may as well get another 5 or 6 and replace them all.
Or leave the tilt sensor disconnected as a bodge but then i don't like to do that.
I suspect some of the other wires are corroded too so i may as well get another 5 or 6 and replace them all.
Or leave the tilt sensor disconnected as a bodge but then i don't like to do that.
Re: Tilt sensor
Ok so if you look through the second link I posted you should find what your looking for.
Colb
1999 BMW 1.8 Z3
2003 BMW 2.5 Z4
1998 Honda Deauville NT650V
1999 BMW 1.8 Z3
2003 BMW 2.5 Z4
1998 Honda Deauville NT650V
- dazthephot
- Joined: Wed 09 Apr, 2008 18:58
- Posts: 266
- Contact:
Re: Tilt sensor
Thank you my friend, looking now.
- dazthephot
- Joined: Wed 09 Apr, 2008 18:58
- Posts: 266
- Contact:
Re: Tilt sensor
I think it's this one. I'll have to call BMW and see what's included in the repair kit..
http://www.realoem.com/bmw/enUS/showpar ... Id=61_4933
Plug number 6
http://www.realoem.com/bmw/enUS/showpar ... Id=61_4933
Plug number 6
Re: Tilt sensor
Yes thats the one £9.76 when I bought it 03/2016
Brian
3.0I Topaz Blue
2000 E36/7 Z3 3.0i
2016 F31 335d
2015 F21 118i
3.0I Topaz Blue
2000 E36/7 Z3 3.0i
2016 F31 335d
2015 F21 118i
- dazthephot
- Joined: Wed 09 Apr, 2008 18:58
- Posts: 266
- Contact:
Re: Tilt sensor
Beauty, thank you
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro