Need set of Lambda sensors for S50

For the M Powered Z3 derivatives
Post Reply
User avatar
Robin
Joined: Sun 14 Dec, 2003 18:35
Posts: 2691

  M roadster S50
Location: Southampton
Contact:

Need set of Lambda sensors for S50

Post by Robin »

I'm having trouble finding a supplier give me the correct part numbers to make a set of four Bosch Lamda sensors
My understanding is I need one for pre cat & one for post cat for cyl 1-3 & same for cyl 4-6
But part numbers given to me by suppliers don't match what's on their site

Do I need four different sensors or two pairs ?
My guess is only difference between a pre Cat sensor for cyl 1-3 versus cyl 4-6 is the lead length.
Same ref the two post cat ones.
Does anyone know a good supplier & the part numbers?
Need to buy Bosch, as I brought some unbranded ones & they packed up after a year !
Thanks in advance
Image
'High G' motoring enthusiast
User avatar
pingu
Joined: Fri 30 Apr, 2004 16:01
Posts: 3412

  M roadster S50

Re: Need set of Lambda sensors for S50

Post by pingu »

S50 only has two pre-cat sensors only. One on the 1-3 pipe and one on the 4-6 pipe. There are no post-cat sensors on the S50, but there are on the S54 (which has a different system up to the rear boxes).

http://www.realoem.com/bmw/enUS/showpar ... Id=18_0229

Parts 26 and 28

The length of the wire isn't that critical (providing it is long enough), so 2x Item 26 won't be a problem if it saves some pennies. but 2x Item 28 will mean that one wire will be too short.

Google the part numbers to find Bosch equivalents.
Pingu
User avatar
Robin
Joined: Sun 14 Dec, 2003 18:35
Posts: 2691

  M roadster S50
Location: Southampton
Contact:

Re: Need set of Lambda sensors for S50

Post by Robin »

Excellent Pingu. Much appreciated. All makes sense now
Image
'High G' motoring enthusiast
Post Reply